519656
41
Zoom out
Zoom in
Previous page
1/133
Next page
NETGEAR genie Advanced Home
41
N300 Wireless ADSL2+ Modem Router DGN2200v4
2. Specify the settings that you want to customize (see LAN Setup Screen Settings).
3. Click Apply.
Your changes are saved.
LAN Setup Screen Settings
The following settings are available.
Device Name. By default, this is DGN2200v4 (the modem router model). You can change
it to another name if you prefer.
LAN TCP/IP Setup
IP Address. The LAN IP address of the modem router.
IP Subnet Mask. The LAN subnet mask of the modem router. Combined with the IP
address, the IP subnet mask allows a device to know which other addresses are local to
it, and which addresses have to be reached through a gateway or modem router.
RIP Direction. Router Information Protocol (RIP) allows the modem router to exchange
routing information with other routers. This setting controls how the modem router sends
and receives RIP packets. Both is the default setting. With the Both or Out Only setting,
the modem router broadcasts its routing table periodically. With the Both or In Only
setting, the modem router incorporates the RIP information that it receives.
RIP Version. This setting controls the format and the broadcasting method of the RIP
packets that the modem router sends. It recognizes both formats when receiving. By
default, the RIP function is disabled.
- RIP-1 is universally supported. It is adequate for most networks, unless you have an
unusual network setup.
- RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in
RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting.
Use Router as a DHCP Server
Usually, this check box is selected so that the modem router functions as a Dynamic Host
Configuration Protocol (DHCP) server.
Starting IP Address. Specify the start of the range for the pool of IP addresses in the
same subnet as the modem router.
Ending IP Address. Specify the end of the range for the pool of IP addresses in the
same subnet as the modem router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer receives
the same IP address each time it accesses the modem router’s DHCP server. Assign
reserved IP addresses to servers that require permanent IP settings. See
Address
Reservation on page 42.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear DGN2200Bv4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear DGN2200Bv4 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear DGN2200Bv4

Netgear DGN2200Bv4 Installation Guide - English - 14 pages

Netgear DGN2200Bv4 Installation Guide - German - 14 pages

Netgear DGN2200Bv4 User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info