519656
10
Zoom out
Zoom in
Previous page
1/133
Next page
Hardware Setup
10
N300 Wireless ADSL2+ Modem Router DGN2200v4
Internet Solid green. You have an Internet connection. If the connection timed out based
on the setting you entered in the Internet Setup screen, but the DSL connection
is still present, the LED stays green. If the Internet connection is dropped for any
other reason, the LED turns off.
Solid red. The
Internet (IP) connection failed. For troubleshooting information,
see Troubleshoot the Internet Connection on page 122.
Blinking green. Data is being transmitted over the DSL port.
Off. No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
DSL
Solid green. You have a DSL connection. In technical terms, the DSL port is
synchronized with an ISP’s network-access device.
Blinking green.
The modem router is negotiating the best possible speed on the
DSL line.
Solid red.
The DSL connection could not be established.
Off.
The unit is off or there is no DSL link established.
WAN Network
Solid green. The modem router obtained a WAN IP address over Ethernet WAN
port 4 and the Internet connection is established.
Off. Ethernet W
AN port 4 is not being used as a WAN port, or the ISP has not
yet assigned an IP address over this port.
USB
Solid green. A USB device is connected and ready to use.
Blinking green.
A USB device is in use.
Off. No USB device connected, or someone clicked the Safely Remove
Hardware button, or an error has occurred with the device.
LAN (1-4)
Solid green. The LAN port has detected an Ethernet link with a device.
Off. No link is detected on this port.
Power
Solid green. Power is supplied to the modem router.
Solid red. POST (power-on self-test) failed or a device malfunction has
occurred.
Off. Power is not supplied to the modem router.
Blinking. When the Restore Factory Settings button is pressed for 6 seconds
(pressing it briefly resets the unit, the Power LED blinks red three times and then
turns green as the modem router resets to the factory defaults.
Table 1. Front panel icons for buttons and LEDs (continued)
Icon Description
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear DGN2200Bv4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear DGN2200Bv4 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear DGN2200Bv4

Netgear DGN2200Bv4 Installation Guide - English - 14 pages

Netgear DGN2200Bv4 Installation Guide - German - 14 pages

Netgear DGN2200Bv4 User Manual - German - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info