519533
144
Zoom out
Zoom in
Previous page
1/162
Next page
Troubleshooting
144
D6200 WiFi DSL Modem Router
Some cable modem service providers require you to use the MAC address of the
computer initially registered on the account. You can view the MAC address in the
Attached Devices screen.
Troubleshoot with the LEDs
After you turn on power to the WiFi DSL modem router, the following sequence of events
should occur:
1. When power is first applied, verify that the Power LED is lit.
2. Verify that the Power LED turns red within a few seconds, indicating that the self-test is
running.
3. After approximately 30 seconds, verify the following:
The Power LED is solid green.
The Internet LED is lit.
The Ethernet LED is lit for any local port that is connected to a computer. This LED
indicates that a link has been established to the connected device.
The LEDs on the front panel of the WiFi DSL modem router can be used for troubleshooting.
Power LED Is Off or Blinking
Make sure that the power cord is securely connected to your WiFi DSL modem router and
that the power adapter is securely connected to a functioning power outlet.
Make sure that you are using the power adapter that NETGEAR supplied for this product.
If the Power LED blinks slowly and continuously, the WiFi DSL modem router firmware is
corrupted. This situation can happen if a firmware upgrade is interrupted, or if the WiFi
DSL modem router detects a problem with the firmware. If the error persists, you have a
hardware problem. For recovery instructions or help with a hardware problem, contact
technical support at
http://support.netgear.com/general/contact/default.aspx.
Power LED Stays Red
When the WiFi DSL modem router is turned on, the Power LED turns red for about 20
seconds and then turns green. If the LED does not turn green, the WiFi DSL modem router
has a problem.
If the Power LED is still red 1 minute after you turn on power to the WiFi DSL modem router:
1. Turn off the power and back on to see if the WiFi DSL modem router recovers.
2. Press and hold the Reset button to return the WiFi DSL modem router to its factory settings.
See Factory Settings on page 153.
If the error persists, you might have a hardware problem and should contact technical
support at
www.netgear.com/support.
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear D6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear D6200 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear D6200

Netgear D6200 Installation Guide - English - 20 pages

Netgear D6200 Installation Guide - German - 20 pages

Netgear D6200 User Manual - German - 176 pages

Netgear D6200 Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info