519533
141
Zoom out
Zoom in
Previous page
1/162
Next page
Advanced Settings
141
D6200 WiFi DSL Modem Router
The remote VPN endpoint must have this VPN gateway’s address entered as its
remote VPN endpoint.
Local LAN. These settings identify which computers on your LAN are covered by this
policy. For each selection, data must be provided as follows:
- Single address. Enter an IP address in the Single/Start IP address field.
Typically, this setting is used when you wish to make a single server on your LAN
available to remote users.
- Range address. Enter the starting IP address in the Single/Start IP address field,
and the finish IP address in the Finish IP address field. This setting must be an
address range used on your LAN.
- Subnet address. Enter an IP address in the Single/Start IP address field, and the
desired network mask in the Subnet Mask field.
The remote VPN endpoint must have these IP addresses entered as its remote
addresses.
Remote LAN. These identify which computers on the remote LAN are covered by this
policy. For each selection, data must be provided as follows:
- Single PC - dynamic IP. Select this option if there is no LAN (only a single
computer) at the remote endpoint. If this option is selected, no additional data is
required.
- Single address. Enter an IP address in the Single/Start IP address field. This
setting must be an address on the remote LAN. Typically, this setting is used
when you wish to access a server on the remote LAN.
- Range address. Enter the starting IP address in the Single/Start IP address field,
and the finish IP address in the Finish IP address field. This range must be an
address range used on the remote LAN.
- Subnet address. Enter an IP address in the Single/Start IP address field, and the
desired network mask in the Subnet Mask field.
The remote VPN endpoint must have these IP addresses entered as its local
addresses.
ESP Configuration. ESP (encapsulating security payload) provides security for the
payload (data) sent through the VPN tunnel.
- SPI. Enter the required SPIs. Each policy must have unique SPIs. These settings
must match those for the remote VPN endpoint. The Incoming setting here must
match the Outgoing setting on the remote VPN endpoint, and the Outgoing setting
here must match the Incoming setting on the remote VPN endpoint.
- Encryption. Select the desired encryption algorithm, and enter the key in the field
provided. For 3DES, the keys should be 24 ASCII characters (48 hex characters).
- Authentication. Select the desired authentication algorithm, and enter the key in
the field provided. For MD5, the keys should be 16 ASCII characters (32 hex
characters). For SHA-1, the keys should be 20 ASCII (40 hex characters).
4. Click Apply.
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear D6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear D6200 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear D6200

Netgear D6200 Installation Guide - English - 20 pages

Netgear D6200 Installation Guide - German - 20 pages

Netgear D6200 User Manual - German - 176 pages

Netgear D6200 Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info