519533
126
Zoom out
Zoom in
Previous page
1/162
Next page
Advanced Settings
126
D6200 WiFi DSL Modem Router
Static Routes
Static routes provide more routing information to your WiFi DSL modem router. Under usual
circumstances, the WiFi DSL modem router has adequate routing information after it has
been configured for Internet access, and you do not need to configure more static routes.
You have to configure static routes only for unusual cases such as multiple WiFi DSL modem
routers or multiple IP subnets on your network.
As an example of when a static route is needed, consider the following case:
Your primary Internet access is through a cable modem to an ISP.
You have an ISDN WiFi DSL modem router on your home network for connecting to the
company where you are employed. This WiFi DSL modem router’s address on your LAN
is 192.168.1.100.
Your company’s network address is 134.177.0.0.
When you first configured your WiFi DSL modem router, two implicit static routes were
created. A default route was created with your ISP as the gateway, and a second static route
was created to your local network for all 192.168.1.x addresses. With this configuration, if you
attempt to access a device on the 134.177.0.0 network, your WiFi DSL modem router
forwards your request to the ISP. The ISP forwards your request to the company where you
are employed, and the request is likely to be denied by the company’s firewall.
In this case you have to define a static route, telling your WiFi DSL modem router that
134.177.0.0 should be accessed through the ISDN WiFi DSL modem router at
192.168.1.100. In this example:
The Destination IP Address and IP Subnet Mask fields specify that this static route
applies to all 134.177.x.x addresses.
The Gateway IP Address field specifies that all traffic for these addresses should be
forwarded to the ISDN WiFi DSL modem router at 192.168.1.100.
A metric value of 1 works since the ISDN WiFi DSL modem router is on the LAN.
Private is selected only as a precautionary security measure in case RIP is activated.
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear D6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear D6200 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear D6200

Netgear D6200 Installation Guide - English - 20 pages

Netgear D6200 Installation Guide - German - 20 pages

Netgear D6200 User Manual - German - 176 pages

Netgear D6200 Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info