519533
122
Zoom out
Zoom in
Previous page
1/162
Next page
Advanced Settings
122
D6200 WiFi DSL Modem Router
2. In the Port Forwarding/Port Triggering screen, configure the WiFi DSL modem router to
forward the HTTP service to the local address of your web server at 192.168.1.33.
HTTP (port 80) is the standard protocol for web servers.
3. (Optional) Register a host name with a Dynamic DNS service, and configure your WiFi DSL
modem router to use the name.
For more information, see Dynamic DNS on page 124.
To access your web server from the Internet, a remote user has to know the IP address
that has been assigned by your ISP. However, if you use a Dynamic DNS service, the
remote user can reach your server by a user-friendly Internet name, such as
mynetgear.dyndns.org.
Set Up Port Triggering
Port triggering is a dynamic extension of port forwarding that is useful in these cases:
More than one local computer needs port forwarding for the same application (but not
simultaneously).
An application needs to open incoming ports that are different from the outgoing port.
When port triggering is enabled, the WiFi DSL modem router monitors outbound traffic
looking for a specified outbound “trigger” port. When the WiFi DSL modem router detects
outbound traffic on that port, it remembers the IP address of the local computer that sent the
data. The WiFi DSL modem router then temporarily opens the specified incoming port or
ports and forwards incoming traffic on the triggered ports to the triggering computer.
While port forwarding creates a static mapping of a port number or range to a single local
computer, port triggering can dynamically open ports to any computer that needs them and
can close the ports when they are no longer needed.
Note: If you use applications such as multiplayer gaming, peer-to-peer
connections, real-time communications such as instant messaging,
or remote assistance (a feature in Windows XP), you should also
enable Universal Plug and Play (UPnP). For more information, see
Universal Plug and Play on page 131.
To set up port triggering, you need to know which inbound ports the application needs. Also,
you need to know the number of the outbound port that triggers the opening of the inbound
ports. You can usually determine this information by contacting the publisher of the
application or user groups or newsgroups.
To set up port triggering:
1. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear D6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear D6200 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear D6200

Netgear D6200 Installation Guide - English - 20 pages

Netgear D6200 Installation Guide - German - 20 pages

Netgear D6200 User Manual - German - 176 pages

Netgear D6200 Installation Guide - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info