Manual Netgear D6200 (page 117 of 162) (English)

519533

117

Zoom out

Zoom in

1/162

Advanced Settings

117

D6200 WiFi DSL Modem Router

source address and port, and sends this request message through the Internet to the IRC

server.

4. Noting your port triggering rule and having observed the destination port number of 6667,

your WiFi DSL modem router creates an additional session entry to send any incoming port

113 traffic to your computer.

5. The IRC server sends a return message to your WiFi DSL modem router using the

NAT-assigned source port (as in the previous example, say port 33333) as the destination

port. The IRC server also sends an identify message to your WiFi DSL modem router with

destination port 113.

6. Upon receiving the incoming message to destination port 33333, your WiFi DSL modem

router checks its session table to determine whether an active session for port number

33333 exists. Finding an active session, the WiFi DSL modem router restores the original

address information replaced by NAT and sends this reply message to your computer.

7. Upon receiving the incoming message to destination port 113, your WiFi DSL modem

router checks its session table and learns that an active session exists for port 113

associated with your computer. The WiFi DSL modem router replaces the message’s

destination IP address with your computer’s IP address and forwards the message to your

computer.

8. When you finish your chat session, your WiFi DSL modem router eventually senses a

period of inactivity in the communications. The WiFi DSL modem router then removes the

session information from its session table, and incoming traffic is no longer accepted on port

numbers 33333 or 113.

To configure port triggering, you need to know which inbound ports the application needs.

Also, you need to know the number of the outbound port that triggers the opening of the

inbound ports. You can usually determine this information by contacting the publisher of the

application or user groups or newsgroups.

Note: Only one computer at a time can use the triggered application.

Port Forwarding to Permit External Host Communications

In both of the preceding examples, your computer initiates an application session with a

server computer on the Internet. However, you might need to allow a client computer on the

Internet to initiate a connection to a server computer on your network. Normally, your WiFi

DSL modem router ignores any inbound traffic that is not a response to your own outbound

traffic. You can configure exceptions to this default rule by using the port forwarding feature.

A typical application of port forwarding can be shown by reversing the client-server

relationship from the previous web server example. In this case, a remote computer’s

browser needs to access a web server running on a computer in your local network. Using

port forwarding, you can tell the WiFi DSL modem router, “When you receive incoming traffic

on port 80 (the standard port number for a web server process), forward it to the local

computer at 192.168.1.123.” The following sequence shows the effects of the port forwarding

rule you have defined:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Netgear D6200 in the language / languages: English as an attachment in your email.

The manual is 10,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear D6200

Netgear D6200 Installation Guide - English - 20 pages

Netgear D6200 Installation Guide - German - 20 pages

Netgear D6200 User Manual - German - 176 pages

Netgear D6200 Installation Guide - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Netgear D6200 Manual

Product: