40
Modes, Rules, and Smart Alerts
5. Tap Allow.
Geofencing works only if Arlo can locate your mobile device. The Location
Address page displays.
6. To change the addrress, tap the Address field, type the address for your
location., and then tap Next.
The geofence radius displays as Medium.
7. To change your radius setting, tap the Radius icon, select a radius size, and tap
Next.
Radius size options are Small, Medium, or Large (approximately 150 meters,
250 meters, and 500 meters, respectively).
8. Enter a name for your location and tap Next.
The Away Mode page displays a list of available modes. The away mode is the
detection mode used by the camera when you are away from the location that
you specified.
9. Select an away mode and tap Next.
Note: When your mobile device is out of zone, the Arlo device defaults to the away
Mode. Most people select Armed or Custom Mode while they are away.
10. Select a home mode and tap Next.
Note: When your mobile device is In Zone, the Arlo device defeaults to the home mode
Most people select Disarmed or Custom Mode while they are home.
If you use more than one enabled mobile device, you might be asked to select an
Arlo device to connect it to.
11. Tap the preferred mobile device and tap Next.
12. Tap Save.
Geofencing With Multiple Mobile Devices
If you want multiple mobile devices to participate in your Arlo geofencing, make
sure that the required conditions are met, and then follow the steps to enable or
disable geofencing for the devices.
