681349
9
Zoom out
Zoom in
Previous page
1/27
Next page
Get started
9
The correct switch setting depends on whether you have a mechanical or a digital
chime.
Mechanical chimes usually make a sound like ding dong. Digital chimes can have a
variety of sounds; some can play tunes.
If you have a mechanical chime, set the chime switch to position 2.
If you have a digital chime, set the chime switch to position 1 or 3. During
installation, the Arlo app guides you to select the correction position.
During installation, the Arlo app guides you to set this switch. The quick start guide
that came with your doorbell also includes information about setting this switch.
Connect the doorbell battery cover to your existing chime
1. Turn o the power to your current doorbell at the breaker.
2. Remove your current doorbell.
3. Connect the wires coming out of the wall to the terminals on the back of the
Arlo doorbell battery cover with the screws we provide.
If the wires are too short, use the accessories we provide.
4. Feed the wires back into your wall.
5. Secure the Arlo battery cover to the wall using
the mounting screws.
6. Turn the power on at the breaker.
Battery cover
Wire screw
Current doorbell wires from
your wall (Either wire can
connect to either terminal.)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell

Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell Quick start guide - English - 20 pages

Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell Installation Guide - English - 20 pages

Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell Installation Guide - German - 16 pages

Netgear Arlo Pro 2 Camera System With Arlo Audio Doorbell Installation Guide - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info