646452
118
Zoom out
Zoom in
Previous page
1/154
Next page
109NetBotz Appliance User’s Guide
Option Description
Address The extended address (MAC) of each sensor pod in the wireless
network.
Pod Type The function of the sensor pod on the wireless network -
Coordinator, Router, or End Device.
Model The model of the wireless sensor.
Label The label that identifies the device.
Note: You can change the label in the Advanced View sensor
pane.
Current Firmware Version The firmware version on the device.
Recommended Firmware Version The firmware version available for update.
Firmware Status Indicates the device firmware is in one of the following states:
Firmware update pending: The Coordinator is sending a
firmware update to the wireless device.
Ready to apply: The Coordinator has finished sending the
firmware update to the wireless device. You can now apply the
firmware update.
Note: It is best to wait until all the devices that require an
update report their status as Ready to apply before you click
the Apply Firmware Update button. Otherwise, you must
apply the firmware update again.
Up to date: The device firmware does not need an update.
Auto Join Allow devices to automatically join and form the wireless sensor
network.
Note: You cannot manually add or remove devices while the
network is forming.
Manual Add Add the extended address (MAC) of each device in your wireless
network to the commission list manually.network.
Note: This option is not available when Auto Join is running.
Manual Remove Remove an extended address (MAC) from the commission list
manually.
Note: This option is not available when Auto Join is running.
Apply Commission List Apply the list of extended addresses (MAC addresses) to save it
on the NetBotz appliance.
Configure Coordinator Required for the Wireless Sensor Pod 180 only. Identify the serial
port ID for the Coordinator, select the ‘APC Wireless Sensor Pod
180’ device type, and specify the port label.
Apply Firmware Update Active when a firmware update is available for the sensor pods.
Note: The firmware update for the wireless sensor pods is
included in the BotzWare version upgrade.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info