646452
66
Zoom out
Zoom in
Previous page
1/154
Next page
57NetBotz Appliance User’s Guide
Output control sensor settings
After you select an output control device from the Output Control Configuration window and click
Sensors, the Sensor Configuration window opens. Select a relay from the Sensors list to display
thresholds defined for the selected sensor in the Thresholds list.
Sensor settings. To modify a sensor:
1. Select a relay to modify from the Sensors list. Click Modify.
2. Type a label in the Label field. This label can be up to 64 characters in length, and identifies the
relay in the Sensor Data pane, Advanced View interfaces, and in alert notifications.
3. From Sensor Value History, select the amount of time that data reported by this sensor is stored
on the appliance. The amount of data available on the appliance affects the maximum amount of
data that can be graphed.
4. Click OK.
For more information see “Viewing Graphs” on page 27.
Threshold settings. To configure a threshold, select the sensor from the Sensors list. Configured
thresholds for the selected sensor appear in the Thresholds list.
Sensor thresholds are explained in detail in “Advanced View: Defining Thresholds” on
page 113.
To enable or modify a sensor threshold:
1. Select a relay from the Sensor list.
2. Select the threshold to modify from the Thresholds list.
3. Click Edit....
4. The Edit Threshold window appears.
To enable the threshold, check Enabled.
To change threshold settings, use the controls in the Edit Threshold window to set new
values.
5. Click OK.
The controls available in the Edit Threshold window are determined by the type of
threshold that you create or edit. For detailed instructions on how to create or edit
thresholds, see “Advanced View: Defining Thresholds” on page 113.
Testing device power-on behavior. Plug the device directly into a standard power outlet. If power is
restored to the device without requiring interaction, it can be used with the power control pod.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info