646452
62
Zoom out
Zoom in
Previous page
1/154
Next page
53NetBotz Appliance User’s Guide
Exporting the Modbus map
To export the Modbus map to a space-delimited text file:
1. Click View Modbus Map to display the map.
2. Click Save to file... in the upper right corner. A save dialog window opens.
3. Select the location and a file name for the saved data and click Save.
Assigning a register address to a sensor
To assign a Modbus register address to a sensor:
1. Select the pod from the list that hosts the sensor and click Modify Pod Settings....
2. Select the desired sensor(s) from the list and click Generate Register Address. This applies the
first unused register addresses to the selected sensor(s).
To manually assign a register address:
1. Select the pod from the list that hosts the sensor and click Modify Pod Settings....
2. Select the desired sensor from the list and click Modify Register....
3. Enter the register address in the provided field. If you specify an address that is already in use, the
program displays an error message.
Removing a register address from a sensor
To remove a Modbus register address from a sensor:
1. Select the pod from the list that hosts the sensor and click Modify Pod Settings....
2. Select the desired sensor(s) from the list and click Remove Registers. This removes the register
addresses from the selected sensor(s).
Output Control
Note: The Output Control icon appears only when a supported Sealevel I/O device or APC
Switched Rack PDU (up to version 2.74) has been connected to the appliance and configured
using the Serial Devices icon.
For more information on configuring serial devices, see “Serial Devices” on page 99. For
more information about supported Sealevel I/O devices and APC Switched Rack PDUs and
how they connect to the appliance, see the installation and quick configuration manual
included with your appliance.
To configure a supported output control device, double-click the Output Control icon. A list of devices
connected to your appliance appears.
Output control label settings
Select a device from the Output Control Configuration window and click Settings.
1. Type a label for this device in the Label field.
2. Select options for Unplugged alert severity and Unplugged alert profile, and click OK.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info