646452
45
Zoom out
Zoom in
Previous page
1/154
Next page
36NetBotz Appliance User’s Guide
Camera Pods
To configure a camera:
Note: From the Navigation pane, you can right-click a Pelco camera and select Connect to...
to launch the Pelco Web interface for the camera. This will allow access to additional required
configuration settings.
1. For integrated cameras or cameras connected to the appliance, double-click the Camera Pods
icon. The Camera Pod Configuration window appears with a list of cameras.
2. For IP cameras that are shared, for example Pelco cameras, double-click the Shared Cameras
icon. The Shared Camera Configuration window appears listing the IP camera.
For more information on shared cameras, see “Pod, Pelco Camera, and Rack Access
PX-HID Sharing” on page 93.
3. From the window that appeared, select the camera to configure, then configure the camera by
using the buttons described below and in greater detail on the following pages:
Click Settings to specify labels for the camera, to specify an interactive camera frame rate
limit and interactive camera mode limit.
Click Capture to configure the camera image capture settings.
Click Masking to configure the camera motion sensor and to specify motion and block-out
masks, if available.
Click Visual Modes to specify the imaging mode and to specify the window to use with Pan
and Scan mode. (Not available for Pelco PTZ IP cameras.)
Click Sensors to configure the sensors associated with the camera and to create thresholds for
those sensors.
Settings
Select a camera from the Camera Pods window and click Settings to open the Camera Pods Settings
window. From this window you can configure the following camera settings.
Note: Fields displayed may vary depending on the features of the camera selected.
Field Description
Pod Label The label that identifies the device. This field does not appear for
integrated cameras. For integrated cameras the Pod Label is set for
the appliance.
For more information, see “Settings” on page 69.
Camera Label An additional label for the camera. If you provide both a Pod Label
and a Camera Label, images and alerts generated by this device are
identified as Pod Label (Camera Label).
Microphone Label An additional label for the microphone on this pod (camera pods
and CCTV adapter pods only).
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info