646452
11
Zoom out
Zoom in
Previous page
1/154
Next page
2NetBotz Appliance User’s Guide
Introduction
The Schneider Electric NetBotz
®
Web Client and Advanced View each provide a software interface for
monitoring and controlling your NetBotz security and environmental monitoring system with the
following NetBotz appliances:
NetBotz Rack Monitor 450, NetBotz Rack Monitor 550, NetBotz Rack Monitor 570, NetBotz Room
Monitor 455, and NetBotz Room Monitor 355.
You use the Web Client interface primarily to monitor the environment. You use the full-featured
Advanced View to monitor the environment and for system administration. This NetBotz Appliance
Users Guide explains how to use both the Web Client and Advanced View.
System Definition
Your NetBotz security and environmental monitoring system may consist of one or more appliances.
When using the Web Client or Advanced View, you select one appliance on which to view sensor
readings, live video, and associated devices. Devices associated with the appliance are typically NetBotz
camera or sensor pods connected to the appliance, or supported third-party cameras or other supported
devices that have security and environmental monitoring capabilities.
Basic Concepts and Terminology
Sensor pod and camera pod. The terms Sensor Pod and Camera Pod are commonly used in both the
Web Client and Advanced View. These terms refer to the two categories of devices that make up your
NetBotz security and environmental monitoring system. Sensor pods typically have multiple internal
sensors or sensor ports for connecting APC or third-party sensors. The NetBotz product line consists of
various sensor pods and camera pods, but in the Web Client and the Advanced View software interface,
references to pods goes beyond the NetBotz products to include other devices, such as Pelco IP cameras
and the Rack Access PX-HID. In addition, the functionality of NetBotz appliances is divided into sensor
pod functionality and camera pod functionality and is initially labeled in the Web Client and Advanced
View as Sensor Pod (Integrated) and Camera Pod (Integrated).
Shared devices. Depending on the hardware and software that you purchased for use with your
NetBotz security and environmental monitoring system, you may be able to monitor remote devices on
your network (for example, Pelco IP cameras, the Rack Access PX-HID, and NetBotz appliances) from
one screen in Advanced View or the Web Client. This feature is called Pod Sharing. If you use Pod
Sharing, remote devices are initially labeled as Shared.
For additional details on shared devices, see “Pod, Pelco Camera, and Rack Access PX-HID
Sharing” on page 93.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBWL0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBWL0455 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info