646450

NetBotz NBRK0550 Manual

150
Zoom out
Zoom in
Previous page
1/154
Next page
141NetBotz Appliance User’s Guide
Solutions
If your appliance has become overloaded, the following configuration adjustments will help alleviate the
load on the appliance:
• If you are using the Scanned Devices functionality, increase the scan interval.
For information on the Scanned Devices functionality, see “Scanned Devices” on
page 44. For details on increasing the scan interval, see “Adding, editing, and
removing SNMP targets” on page 46.
• If you are using Scanners, disable MIB2 scanning on devices. Some devices (routers, for
example) can include many communications interfaces, and scanning all MIB2 interfaces on these
devices can cause delays on Scanners performance.
• Lower the Interactive Frame Rate Limit on some or all cameras connected to the appliance.
Lowering the Interactive Frame Rate Limit will improved performance issues caused by multiple
clients accessing the appliance interactively.
To change Interactive Frame Rate Limits, see “Settings” on page 36.
• If Camera Motion thresholds are enabled for alerting, check the following to ensure that
thresholds and settings are not causing camera motion to be detected continuously:
– Check that the Sensitivity and Area of Motion settings are appropriate for your environment
and the type of motion you want to detect.
– If there are areas of an image that you don't need to detect motion, mask those areas.
To set up a mask, see “Mask settings” on page 41.
– If Camera Motion thresholds (or any other thresholds that include camera images) are
generated frequently, adjust the thresholds to make them less sensitive. You can also use Alert
State for Time alert types instead of Alert State alert types to minimize duplicate event
notifications.
– If there are time periods where you want to ignore motion events, use the Advanced
Scheduling option within the Camera Motion threshold to disable the sensor for specific time
periods.
• Reduce the capture size of pictures being collected by your camera pods.
• If you have several busy camera pods connected to one appliance and have multiple appliances
available, distribute the cameras to the other appliances to even out the image capture load.
• Spread out the initialization of alert notifications over the span of a few minutes by using multiple
alert levels in the Alert Profile.
• Overall Alert Load: If your appliance is detecting more than a couple of alert events every few
minutes, you may need to re-evaluate your alert threshold settings. If you have several alert
actions configured that are running on short intervals, consider breaking those out into longer
intervals or creating multiple profiles that can be customized for different sensor types. This
allows sensors which collect picture captures to have notifications sent on different intervals (and
with different alert actions) than other sensors which might not require picture captures.
… 150 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBRK0550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBRK0550 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info