646450
30
Zoom out
Zoom in
Previous page
1/154
Next page
21NetBotz Appliance User’s Guide
Viewing Live Video
Click the Camera View button in the Action/Information pane to view live video captured by the
appliance, cameras connected to the appliance, or shared IP cameras on your network. Controls are
applied to the top-most camera image. Click an image to change its position to the top. To view all
camera images side by side, click the Tiled check box.
For information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-HID
Sharing” on page 93.
Standard camera controls
Control Description
Mode To change the size of the image, right-click the camera image, and select Configure
Camera. Select Settings, and, from the Mode drop-down list, choose dimensions
(resolution) for the image. The dimensions 640x480, for example, mean 640 pixels wide by
480 pixels high. NOTE: As the image dimensions increase, the maximum image rate
available will decrease.
Rate To change the frame rate, that is, the frequency that the video image is updated, make a
selection from the Refresh Rate drop-down list in the Camera View. NOTE: The
maximum rate available is determined by the mode setting (described above) and, if
applicable, the image quality settings.
NOTE: The maximum frame rate for shared IP cameras is limited to 15 frames per second.
For more information on image quality settings, see “Capture settings” on page 38.
For more information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-
HID Sharing” on page 93.
Zoom This zoom feature does not apply to Pelco PTZ cameras. See “Pelco PTZ camera controls”
on page 22 for details on the zoom features for Pelco PTZ cameras.
1. To avoid distortions, right-click the camera image and select Maintain aspect ratio.
2. Within the camera image, click and drag to draw a box around the area of interest.
3. Right-click the camera image and select Zoom in.
4. To return to the full camera image, right-click and select Zoom out.
Only available when a microphone is connected to the NetBotz appliance or a pod. Click to
listen to streaming audio. Click again to turn off the audio.
Only available when speakers are connected to the NetBotz appliance or a pod. Click and
hold the button while speaking into your system microphone. NOTE: While transmitting
audio, you will not be able to hear audio from the device.
These audio features are only available when the Advanced Software Pack has been installed on
the system running Advanced View. The Advanced Software Pack is included with a NetBotz 550
or NetBotz 570 appliance, but must be purchased separately when using any other NetBotz
appliance. To check if the software pack has been installed, click the Configuration button, then
click License Keys from the Appliance Settings area.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz NBRK0550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz NBRK0550 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info