Manual Nestor Martin S33 (page 12 of 48) (English, Spanish)

571179

Zoom out

Zoom in

1/48

Fig. 18

If you also have an optional draft control (fig. 10),

fitted in the flue above the stove, place the valve

open.

3. Place five or six loosely crumpled sheets of

newspaper in the bottom of the stove. Add a small

amount of dry kindling randomly on the top of the

newspaper. Place a few more loosely crumpled

newspaper on top of the kindling and light the

bottom paper first, then light the top paper.The

upper fire should preheat the chimney and create

an effective draft while the lower fire ignites the

kindling.

It is advisable to leave the door ajar for a few

minutes to facilitate the ignition and avoid

condensation, keeping the glass clean. Never leave

the stove unattended with the door open.

4. Once the fire has started, add increasingly larger

pieces of wood until the fire is actively burning.

5. When the fire is well established, slide the Burn

Type Lever to the top for normal operation with

wood (“A”). Then adjust the Burn Rate Knob to the

desired heat output, either manually or with the

remote control. If you have the Catalytic Hybrid

Woodbox System, close the by-pass to allow the

flue gases pass through the catalyst (Fig. 19) to

achieve the maximum efficiency of the stove.

Protect your hands for such operation. In addition,

if you have an optional draft control (fig. 10), you

can regulate combustion by operating its control.

When burning smokeless coal (Not recommended in

the Catalytic Hybrid Woodbox stoves):

 Always keep the Burn Type Lever in its lower

position ("B"), once the fire is established.

 If your model has a blind grate, remove it, lift

the grate from the bottom of the fire chamber.

Under the grate is the blind grate.

Fig. 19

Fig. 20

3.5. RELOADING THE STOVE

To refuel the stove, first slide the Burn Type Lever to its

mid position, and then rotate the Burn Rate Knob to

maximum. Let the fire “liven up” for about one minute.

Always riddle the grate before putting another load of

smokeless coal to give the initial release of gasses

sufficient air with which to burn.

Open the front door slightly and hold in this position

about 30 seconds or until stove is drafting well. Open

the front door all the way and rake the embers towards

the front of the stove, spreading them evenly. If there

are logs only partially burned, rake these to the front

of stove.

Add fuel. If the fire or coal bed is almost depleted and

a full load of cordwood is added, it may be necessary

to leave the Burn Rate Knob on the high setting for a

while to re-establish a lively fire. Once the fuel is

burning at a brisk rate, slide the Burn Type Lever back

to Position A (wood) or B (coal) and turn the Burn Rate

Knob down to the desired setting.

3.6. OVERNIGHT BURNING

By-pass

By-pass close

Blind grate

Grate

Catalyst

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin S33 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nestor Martin S33

Nestor Martin S33 User Manual - English - 31 pages

Nestor Martin S33 User Manual - Dutch, French - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nestor Martin S33 Manual

Product: