Manual Nestor Martin S13 (page 6 of 48) (English, Spanish)

571181

Zoom out

Zoom in

1/48

goes into the fireplace chimney. The liner of the

fireplace chimney should extend at least to the point at

which the chimney connector enters the chimney.

Follow all the guidelines for installing a chimney

connector into a freestanding masonry chimney, and

pay special attention to these additional points:

- Double check the connector clearance from

the ceiling: 18” (45 cm) minimum.

- The fireplace damper or register plate must be

closed and sealed to prevent room air from

being drawn up the flue, thereby reducing the

draft.

However, it must be possible to re-open the

damper or have an access plate in a register

plate to inspect the chimney.

2.4. Wall Pass-Throughs

Whenever possible, design your installation so that the

wall connector does not pass through a combustible

wall. If you are considering a wall pass-through in your

installation, check with your building inspector before

you begin. Also check with the chimney connector

manufacturer for any specific requirements.

Accessories are available for use as wall pass-throughs.

If using one of these, make sure it has been tested and

listed for use as a wall pass-through. We recommend

the following guidelines when passing chimney

connectors through combustible walls:

- Cut away all combustible material in the wall a

sufficient distance from the single wall connector,

to provide the required 12” (300 mm) clearance for

the connector. Any material used to close the

opening must be non-combustible (as in Fig. 5

below).

- Using a section of double-wall chimney with a 9”

(230 mm) clearance to combustibles.

- Placing a chimney connector pipe inside a

ventilated sleeve, which is then separated from

combustibles by 6” (150 mm) of fiberglass insulating

material.

Fig. 5. – An example of a correct Wall pass-through.

3. USE

Once your stove has been installed and connected to

the chimney, you are ready to light the fire.

Before lighting your stove for the first time, please take

time to become familiar with the different control

systems and parts of the unit, how to choose the wood,

how to light it and use it on a daily basis.

Ensure that the ash pan is empty.

ALWAYS KEEP IN MIND that the stove generates heat

and, therefore, keep children, clothing, furniture... at a

distance to prevent burns from direct contact with the

appliance.

Below, we have included some advice on your stove and

on its use. Please read with care.

3.1. THE WOODBOX® COMBUSTION SYSTEM

The Woodbox® system uses a balance of preheated

primary air, secondary air and natural flue draft in a

process of combustion and post-combustion, to obtain

extremely high efficiency and total controllability of the

fire.

The Woodbox® stoves, are equipped with a variable flap

mechanism to control the air intake with precision,

according to the type of combustion and the desired

tempo of the fire. The controls allow you to open these

flaps manually. An optional remote control kit allows

you to open and close these flaps automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin S13 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nestor Martin S13

Nestor Martin S13 User Manual - Dutch, French - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nestor Martin S13 Manual

Product: