571185
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
the chimney, which are protected if possible
against rust (enamelled steel, aluminized steel,
stainless steel, …)
Choose the most vertical route possible.
Do not connect several devices to the same
chimney.
The conduit should not come to an end near
buildings and must be higher than the nearest
obstacle if there is another building nearby.
The internal walls must be perfectly smooth
and free from obstacles.
Avoid bottlenecks where pipes join the brick
chimney.
Ensure that the joints of the pipes are well
sealed to avoid air entering through cracks.
2.2. Installation of the stove.
1. Position the unit no closer than the minimum
clearances to combustible materials (see safety
chapter). Reposition unit if necessary, being careful
not to move closer than the minimum clearances.
2. Position the unit on the floor at the proper
clearances. If the floor is made of combustible
material (for example, parquet) it must be
protected with a slab of fireproof material, placed
under the stove and around it. The size should be
such that it protrudes from the appliance: 20 cm
back and sides and 50 cm front.
3. Install the stove to the fireplace, sealing it properly.
4. The stove can never be connected to air ducts or a
ventilation system.
5. Appropriate firebreaks, firewalls must be installed
when a section of the chimney passes through
floors and/or ceilings. The insulation will be at least
50 mm thick from the flue to the structure. It is
necessary to protect the walls with wall protectors
when the chimney is not at the indicated sage
distance and damage may occur. (See Fig. 2.).
FIG: 2
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE
SERVING ANOTHER APPLIANCE.
Fig. 3.- Chimney connection in a fireplace.
Fig. 4. Chimney connector enters chimney above the fireplace
2.3. Above a Fireplace.
In this type of installation, the chimney connector rises
from the stove, turns no greater than 45ᵒ, and then
Thermal Insulation
Chimney pipe
Ceiling
Metal Fitting
Flue liner
Total height
minimum of
4.5 m
Sufficient clearance, also for
maintenance and air circulation
Cowl
Flue liner support collar
Weatherproof
capping and pot
Sound chimney
brick work
Flexible to single
wall adapter
Register plate,
positioned as low
as possible to aid
convection
Access for
cleaning
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nestor Martin H43 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin H43 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nestor Martin H43

Nestor Martin H43 User Manual - Dutch, French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info