810519
69
Zoom out
Zoom in
Previous page
1/77
Next page
C07100DC023
68
Annual Maintenance
The catalyser and support ring should be removed from the burner.
The flue should be examinated for evidence of soot and where this is evident the flue should be swept.
All flue joints examined and re-sealed where necessary.
The stove should be vacuumed to remove all soot and debris.
The drip tray removed and cleared of all dirt and fluff.
The burner bowl should be examinated for deposits adhering to both the sides and bottom, and all deposits
removed from the fuel inlet.
Where fitted, the electric igniter should be cleaned and examined for any signs of distress.
The catalyser should be cleaned and assessed as to its condition and suitability for a further 12 months operation.
The glass should be cleaned using, only vinegar and water with any damaged glass being replaced.
All rope seals should be examined and replaced where necessary.
The door, hinge and locking mechanism examined for damage.
The stove body examined for damage.
The carburator and control knob extensions examined for wear or damage.
The oil storage tank should be examinated for leakage, the filter removed and examined for evidence of
contamination before being cleaned or replaced.
The oil supply pipe work and any valves and filters examined and cleaned or replaced as necessary.
The oil valve and immediate supply and delivery pipe work examined for evidence of leaking.
The catalyser should be examined for signs of deterioration and black carbon, which indicates poor flue draught.
The red oxidation must not be cleaned off as this aids efficient burning at low settings.
The catalyser and support ring should be reassembled and the burner lit and the stove and flue allowed to reach
its operating temperature.
A draught reading should be taken at both low and high fire with adjustment to the draught stabilizer being made
where necessary.
All remotely operated thermostats and timers systems should be verified as working correctly.
If the operation of the appliance is suspect follow and complete the commissioning instructions.
Catalyser
Catalyser ring
Burner pot
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nestor Martin H41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin H41 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info