Manual Nestor Martin H11 (page 64 of 77) (English, Dutch, French)

810517

Zoom out

Zoom in

1/77

C07100DC023

4. Remove the draining screw and rinse the oil control through with fuel oil from the tank until clear oil emerges

at the point of drainage. In the case of models with no draining screw, the fuel oil must be removed from the

interior of the oil control by means of a suction pump. Note: use only a soft pipe inside the oil control to

prevent damage to any of the interior components.

5. If water should be found inside the oil control, it is advisable to remove the pipe between the oil control and

the burner and to clean it. After the above-mentioned operations have been carried out, a trial run lasting at

least 15 minutes must be made with the device set first at low and then at high.

Should this trial run not prove satisfactory for reasons of the oil flow or the proportions between the fuel and

the combustion air, the oil flow is to be adjusted to the viscosity of the oil and/or the available flue draught or,

if necessary, other more far-reaching adjustments made in the oil control itself. The measures to be taken in

this case are described under «Oil Flow Adjustment».

Removal of the draining screw (Diagram 7) and rinsing

of the oil control with fuel oil from the tank until only

clean oil emerges at the point of drainage. In the case

of models without a draining screw, the fuel oil inside

the oil control must be removed by means of a suction

pump.

Note: use only a soft pipe inside the oil control to

prevent damage to any of the interior components.

Removing the draining screw.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nestor Martin H11 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nestor Martin H11 Manual

Product: