669496
21
Zoom out
Zoom in
Previous page
1/32
Next page
Min 4 sec
> 6 sec
EN
FR
21
Reset to Factory Settings
Emptying the System
before a period of non-use or for frost protection
Factory settings are:
- Lungo, Espresso, Ristretto coffee buttons 110ml /
3.7oz, 40ml / 1.35 oz., 25ml / 0.84 oz.
- Automatic OFF mode after 9 minutes.
- The water hardness set by default is hard, which
corresponds to around 1000 Espresso cups.
To do it via your machine:
1. Ensure the machine is turned OFF.
2. Press and hold Espresso & Lungo buttons for at least
5 seconds.
All the coffee buttons and LEDs will blink once as
confirmation. To unpair your machine, please refer to
the «Troubleshooting section».
If reset to factory setting, this
will cancel the pairing, reset the
capsules stock management and
the descaling alert.
Remove the water tank.
Place a container under
the coffee outlet.
To note, the machine remains blocked for 10 minutes after emptying!
Ensure the machine
is ON, press and hold
the Ristretto & Lungo
buttons together for
at least 6 seconds.
The Ristretto and Lungo coffee buttons will flash for
confirmation. Then close the slider to start procedure. If the slider
was already closed, the emptying process starts automatically. When
the procedure is finished, clean the drip tray and the cup support.
Machine turns to OFF mode automatically when empty.
Reset to Factory Settings /
Emptying the System
before a period of non-use or for frost protection /
Factory settings are:
- Lungo, Espresso, Ristretto coffee buttons 110ml /
3.7oz, 40ml / 1.35 oz., 25ml / 0.84 oz.
- Automatic OFF mode after 9 minutes.
- The water hardness set by default is hard, which
corresponds to around 1000 Espresso cups.
To do it via your machine:
1. Ensure the machine is turned OFF.
2. Press and hold Espresso & Lungo buttons for at least
5 seconds.
All the coffee buttons and LEDs will blink once as
confirmation. To unpair your machine, please refer to the
«Troubleshooting section».
If reset to factory setting, this
will cancel the pairing, reset the
capsules stock management and
the descaling alert.
Remove the water tank.
Place a container under
the coffee outlet.
To note, the machine remains blocked for 10 minutes after emptying!
Ensure the machine
is ON, press and hold
the Ristretto & Lungo
buttons together for
at least 6 seconds.
The Ristretto and Lungo coffee buttons will
flash for confirmation. Then close the slider to
start procedure. If the slider was already closed,
the emptying process starts automatically. When
the procedure is finished, clean the drip tray and
the cup support. Machine turns to OFF mode
automatically when empty.
Job: NES-432001-2003Q-3 ProdigioMilk
Datum: 15-06-05
von: timea.trojko
Uhrzeit: 15:03:43
Seite: q19
Version: --
qInletObjekt:
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nespresso EN170 - Prodigio and Milk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nespresso EN170 - Prodigio and Milk in the language / languages: English, French as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info