4
Maintenance work
• A notication will appear on the coffee machine display if the ma-
chine needs to be serviced. The machine must be serviced by au-
thorized and trained service partners of Thermoplan at least once
every year or every 24’000 product beverages.
Disposal
• An authorized and trained service partner of Thermoplan has to
dispose of the machine and its packaging. Do not dispose of the
machine or its components yourself.
Limitations of liability
• Thermoplan accepts no liability for any injuries or accidents if the
safety instructions covered in this manual are not adhered to. Ad-
ditionally, liability is only accepted within the boundaries of the
machine. Thermoplan shall be liable for faults on the machine in
accordance with the warranty regulations.
• The manufacturer cannot be held liable for any damage caused by
misuse or inappropriate handling of the machine.
Warranty regulations
• The machine is covered by 2 years manufacturer’s warranty from the
date of installation.
• Malfunctions due to misuse or connecting unsuitable connections
shall not be compensated.
• Wear and tear parts are not covered by any warranty.
• Each warranty claim must be recorded by a corresponding
Nespresso
Thermoplan service partner using a fully completed form
that is submitted to Thermoplan.
• Thermoplan reviews the claims, issues RMA numbers to them and
informs the affected reseller which spare parts need to be returned.
• All
Nespresso
machines must pass stringent controls. Reliability
tests under practical conditions are performed randomly on select-
ed units. This can show traces of any previous use.
General Notes:
Risk of material damage
• Wrong handling of the machine could lead to property damage.
• The machine is for indoor use only.
• Clean machine before taking out of service for a longer period of
time. Remove and empty capsules container, disconnect machine
from the mains. Remove and empty milk container, clean and store
with lid open. Leave refrigerator door open.
• Ambient temperature must be between 16 °C and 32 °C.
• Position machine on a at, horizontal, stable and heat-resistant
surface.
• Do not position machine where a water jet could be used to clean.
• Leave a gap of at least 50 mm in front of air vents.
• Store machine in dust free and dry environment, always at a tem-
perature above 0 °C.
• The top of the machine must be at least 1.5 m above the oor.
• Place machine 20 cm or further away from the user.
• Use Thermoplan cleaning accessories only.
• Never use the machine without drip grid.
• The manufacturer does not accept any liability for consequences
arising from both internal and external modications on the ma-
chine.
• Do not store explosive substances such as aerosol cans with a am-
mable propellant inside the appliance.
• Never use the cup heater for drying wet cups; risk of electric shock.
• Always place cups upside-down to ensure good heat transmission.
General Information
