616528

Nero SoundTrax Nero 9 Manual

52
Zoom out
Zoom in
Previous page
1/59
Next page
Nero ScratchBox
Nero SoundTrax 52
ally crossfade from one audio file to another, move the lower slider on
12. of one of the playbacks, move the vertical slider on the
13. e.
14.
15. h, click on the numbered buttons in the upper right in the
Tools area.
Scrat
ches 1 - 3 will be used on the left turntable, scratches 4 - 6 will be used on the right
turntable.
16. If you want to use a sample sound, click the numbered buttons in the lower left of the Tools
section.
17. If you want to use a sample effect, click the numbered button in the lower right of the Tools
section.
18. If you want to record a playback:
1. Click the
11. If you want to manu
the mixing console in the direction of the desired turntable.
If you want to change the volume
respec
tive side.
If you want to change the volume for both audio file
s, move the slider on the mixing consol
If you want to play back a loop from the Tools section, drag the loop icon onto the turntable.
If you want to use a sample scratc
button.
2. Start playback of the audio file(s).
All actions that you execute during the recording will also be recorded.
3. If you would like to end the recording click the
button.
4. Click on the
button to play the recording.
5. Click the
and buttons to fast forward and rewind the recording.
19. If you want to postprocess the scratches in your recording:
1. Click the ScratchEditor button in the Tools section.
The Scratch Editor window is opened.
2. Cha
nge your scratches by clicking the playback curve of the respective turntable and
then moving the handles that appear due to scratching.
3. Close the Scratch Editor.
The ch
anges are accepted.
20. If you want to establish a connection between a control element on the DJ hardware and a
control element in the ScratchBox Editor:
1. Click on the Learn Hardware button.
2. Activate the control ele
ment on the DJ hardware.
3. Click on the control element in the ScratchBox that you want to connect with the corre-
sponding control element on the DJ hardware.
4. Click again on the Hardware Learn button to end the recording.
5. If you want to control the d
esired control element in the ScratchBox then click again on
the control element on the DJ hardware.
You have created a ScratchBox clip.
See also:
Scratch Editor 53
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nero SoundTrax Nero 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nero SoundTrax Nero 9 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nero SoundTrax Nero 9

Nero SoundTrax Nero 9 User Manual - German - 60 pages

Nero SoundTrax Nero 9 User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info