567823
36
Zoom out
Zoom in
Previous page
1/45
Next page
36
When the two devices find each other, you pair them by enter a passkey.
Start with your own device and enter for example 1111, enter the same passkey in the other device.
The devices are now paired.
You only have to pair a device once. When the Bluetooth is set to on and the devices are within range, they will find each
other. The transmission range is up to 10 meters.
If you want to pair a headset you do like this:
Set the headset in pairing mode and place it no more than 20cm from the N2. Read the manual for the
specific headset how to do that.
In the N2, Open the tools menu.
Open the communications icon.
Choose Bluetooth.
Tap on state and choose “On”.
Choose devices.
Now the N2 will find the headset.
Tap on the headset to connect to it. Check the manual for the headset to see which pass code to use.
Enter the pass code.
Now the devices are connected.
Whenever the N2 and the headset are switched on and within range, they’ll connect to each other and work
together.
You can also access Bluetooth by going to the Bluetooth FTP Devices. Go to the start menu and make a change view
sweep. Open the files application. When you open that folder either the device scan for new devices or you can see the
already paired devices.
15.6 Audio Settings
Mark the setting you want to change and tap the screen.
Turn on/off the speakers and the vibration by marking the item and tap the screen.
When you select Ringtone you can choose an audio file stored on the SD card. Mark the sound
you want to use and tap the screen.
When you change Ring/Alert tone volume and Call volume you make a Close view sweep to save
the changes.
You can also choose whether to play the Ring/alarm tone through the headset or the speakers,
when the headset is inserted.
Mark the item and tap the screen to change.
Under Application audio you can change Action and Tone for the following functions:
Alarm
Appointment reminder
Birthday reminder
Incoming message
16.0 Connect your Neonode to a computer
Your Neonode can operate in two different modes while connected to a computer, either in phone mode or as a USB
disk. When turned on, it operates in phone mode. Turned off, it operates as a USB disk.
16.1 Connect as USB disk
Turn off your Neonode. Insert the enclosed USB cable into your Neonode USB port and connect it to a computer. Wait
until the text Connected shows up on the Neonode screen.
Your Neonode will automatically appear on your computer as a Removable disk. You can now access the SD card and
transfer files, such as music, videos and pictures. You can also download and install new updates from
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neonode N2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neonode N2 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neonode N2

Neonode N2 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info