2275
14
Zoom out
Zoom in
Previous page
1/32
Next page
English External Error Detection (EED)
Subject to changes due to technical improvements!
14 External Error Detection (EED) • 08/2010
A potential-free port (make-and-break contact) CON3 is
provided (see figure 4). This can be used for an electronic
fault message.
1 and 2 are for normal operation
3 and 2 break the circuit
Fault message
When the malfunction light flashes at one second intervals,
it means that the boiler is malfunctioning.
Press the reset button on the boiler for three seconds. The
machine restarts. If it malfunctions immediately, press the
reset button again. If it malfunctions again and these
malfunctions continue, call your fitter.
Slow flashing is one second on one second off.
Rapid flashing is on and off several times a second.
0 - 10 V connection
It is possible to use a non-resident control voltage of 0 - 10V
(decent voltage) for controlling the boiler.
Connect to the clamps 1 and 2 of the CON 2, see figure 5.
Fig. 4 External fault message
UBA
1 2 1 2 3 4
CON 2 CON 1
3
2
1
CON 3
No
Loop
Error
Fig. 5 0 - 10V connection
UBA
1 2 1 2 3 4
CON 2 CON 1
3
2
1
CON 3
No
Loop
Error
WARNING!
The external control voltage determines the
supply water temperature. This is not affected
by the UBA setting. The external control has to
be adjusted to limit the supply water tempera-
ture. See the instructions with the external
control.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nefit Moduline IV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nefit Moduline IV in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nefit Moduline IV

Nefit Moduline IV Usermanual and installation guide - Dutch - 54 pages

Nefit Moduline IV User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info