10 - English
English
Operation
During programming, the display shows information about the
switching points of the program.
In rest (normal mode), the following is shown on the display:
figure 3-2 Display in rest
4. Operation
4.1 General
Read this manual carefully, so you can operate the IRT 30
correctly.Your installer can inform you in detail about the use of
the clock thermostat.
Efficient heating and ventilation
- Avoid extreme temperature settings and quick changes of
temperature in the program (difference between day and night
temperature may not exceed 5
°C).
- Do not let the temperature of the rooms drop too low during
night setting. (Your CH must burn longer and more intensely to
heat up walls which are cooled down).
- Make sure your house has a good atmospheric humidity,
especially during the cold months.You can achieve this by
placing indoor plants or humidifiers.A good atmospheric
humidity contributes to a pleasant climate in your house.
- Ventilate well (briefly more ventilation takes less energy than
ventilating a little for a long period).
Clock
- Set the clock of the IRT 30 to the correct time (if necessary),
to ensure correct functioning of the clock thermostat (refer to
paragraph 4.3: Setting the clock).
