614014
80
Zoom out
Zoom in
Previous page
1/88
Next page
80 | 投入运行
MC 4006 720 816 739 (2015/05)
4.5 级联设置菜单
已安装级联模块时,控制器服务菜单上显示 > 级联设置 (不
能在所有控制器中使用)。当已安装控制器而无法使用该菜单
时,级联模块使用基本设置。即使控制器暂时关闭,也可以
用适合的控制器更改设置。
4.6 诊断菜单
菜单取决于安装的控制器和设备。
显示器值
如已安装模块 MC 400 时,菜单显示器值 > 显示级联
该菜单可调用当前设备状态和级联中单个设备的相关信息。
例如,此处可显示出水温度和回水温度,或者当前提供的设
备功率。
已安装模块 MC 400 时,菜单 显示器值 > 显示系统信息 >
级联
该菜单中可以调用模块 MC 400 级联模块类型 SW 版本的
级联模块)和级联中的单个设备 (例如,控制单元 1 类型
SW 版本的控制单元 1)的相关信息。
可用的信息和数值取决于安装的设备。注意热源、控制器、
其他模块和设备部件的技术文档。
基础设置在设置区域内突出显示。
菜单项 设置范围 功能描述
转接装置传感器偏移
– 20 ... 0 ... 20 K
调节装置所需的出水温度变为该值。
级联最大额定温度
30 ... 90 °C
液压转接装置上级联的最大出水温度。
级联泵的延迟运行时间
0 ... 3 ... 15 min
存在热量要求时,连接到级联模块上的加热泵 (次级侧)要比设置运行更长的时间。
峰值负荷的出水温度
30 ... 50 ... 70 °C
当调节装置所需的出水温度超过了这里的设置值时,在串联式级联调整策略中用峰值负荷盖板 (编
码开关调至 3)打开峰值负荷盖板必需的热源。
峰值负荷 室外温度
– 20 ... 10 ... 20 °C
当室外温度低于此处的设置值时,在串联式调整策略中用峰值负荷盖板 (编码开关调至 3)打开峰
值负荷盖板必需的热源。
从动设备 启动延时
0 ... 6 ... 30 min
热源开启时,调节装置要等候已设置好的一段时间,直至下一设备开启。
公差内允许的超温
0 ... 5 ... 10 K
当出水温度已超出所需额定温度公差内允许的超温时 (正向差),为降低设备脉冲首先要关闭
热源。
公差内允许的低温
0 ... 5 ... 10 K
当出水温度已低于所需额定温度公差内允许的低温时 (负向差),为降低设备脉冲首先要开启
热源。
6
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nefit MC 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nefit MC 400 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info