540330
27
Zoom out
Zoom in
Previous page
1/48
Next page
27
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on.
1. Select the hotplate and desired power level using the Tipp
control.
2. Press the 3 symbol. The x indicator on the hotplate lights
up.
‹‹ is displayed on the time program function display.
3. Select the desired cooking time using the Tipp control.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
select the hotplate using the Tipp control. Press the 3 symbol
and change the cooking time using the Tipp control, or set
to
‹‹.
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays
and the time program function screen displays
‹‹for one minute. The x indicator of the hotplate flashes.
Pressing any symbol turns off the indicators and stops the
beep.
Notes
If cooking times have been programmed for various plates,
the time program function displays the shortest cooking time.
The
x indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
1. Press on the 3 symbol, and the time program function
display shows
‹‹.
2. Select the required time using the Tipp control.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
3 symbol and change the time using the Tipp
control, or set to
‹‹.
Once the time has elapsed
A warning beep sounds. The time program function displays
‹‹ and the indicator V comes on. Pressing any symbol turns
off the indicators and stops the beeping.
Keep warm function
This function is used for melting chocolate or butter and for
keeping food warm.
To activate
1. Select the required hotplate using the Tipp control.
2. Within the next 5 seconds, press the symbol.
The
indicator lights up.
The "keep warm" function has been turned on.
To turn off
1. Select the required hotplate using the Tipp control.
2. Press the symbol.
The
display turns off.
After five seconds, the hotplate turns off and the residual heat
indicator appears.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Remove the Tipp control. A signal sounds and the
" indicator
lights up. The control panel is locked for 35 seconds. The
surface of the control panel can now be cleaned without risk of
changing the settings.
Note: The lock does not affect the main switch. The hob may
be turned off when desired.
 
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff T53T86N2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff T53T86N2 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neff T53T86N2

Neff T53T86N2 User Manual - German, Dutch - 64 pages

Neff T53T86N2 User Manual - Danish - 64 pages

Neff T53T86N2 User Manual - French, Italian - 64 pages

Neff T53T86N2 User Manual - Swedish, Norwegian, Finnish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info