336596
12
Zoom out
Zoom in
Previous page
1/92
Next page
Troubleshooting
It is not always necessary to call the Service Centre. In
some cases, you may be able to solve the problem
yourself. This table contains some useful information.
Important information:
Only authorised personnel from our Service Centre are
qualified to work on the main gas and electric systems.
11
What happens... Likely cause Solution
- Replace the gas bottle with
a full one.
- Check the fuse in the main fuse
box and change it if it is damaged.
... if the general electrical
system is malfunctioning?
- Check the main fuse box to see
whether the automatic trip switch
or a differential switch has tripped.
- Carefully clean the spaces
between the ignition sparker and
the burners.
- Make sure that the burner covers
are correctly positioned.
- Dry the burner covers carefully.
... if the flames on the burners
are not uniform?
- Place all the different
pieces correctly.
- Clean the grooves on
the burners gas outlets.
... if the gas flow does not
appear to be normal or no
gas comes out?
- Open any intermediate taps.
... if there is a smell of gas in
the kitchen area?
- Check to see if any gas taps
are on.
- Check that the coupling is correct.
... the safety devices on the
different burners don't work?
- The automatic safety switch has
tripped or a fuse has blown.
- Defective fuse.
cleaning products between the
ignition sparker and the burner.
positioned correctly.
- The burners are wet.
- The different parts of the burner
have been improperly assembled.
- The grooves on the burners gas
outlets are dirty.
- The gas main is turned off.
- If the gas is coming from
a gas bottle, it may be empty.
- There may be a leak between the
coupling and the gas bottle.
- A gas tap has been left on.
- The grooves on the burners' gas
outlets are dirty.
- The control knob was not held down
for long enough.
- Clean the grooves on
the burners gas outlets.
- Once the burner is lit, hold
the control knob down a few
seconds longer.
- Wait 30 min. and it automatically
switches off.
... if the displays light up after
a power cut-off?
- Works correctly. The displays must
work for 30 min.
- Wait 30 min. and it automatically
switches off.
... if the residual heat displays
light up when the hob is
connected for the first time?
- Works correctly. The displays must
work for 30 min.
... if the electronic lighting
does not work and the pilot
- There is waste from food or
of the burner activated
flickers?
... if there is a flame on the
burner but the electronic
- The burner covers are not
lighting continues to work?
- Make sure that the burner covers
are correctly positioned.
positioned correctly.
- The burner covers are not
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff t 63r46 s0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff t 63r46 s0 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info