732138
40
Zoom out
Zoom in
Previous page
1/115
Next page
en Faults – what to do?
40
--------
Displays do not illuminate.
The mains plug has not been inserted properly. Connect the mains plug.
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
Display indicates “E…”.
Electronics have detected a fault. Call the after-sales service.
~ "Customer service" on page 41
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on. Start the appliance self-test.
~ "Appliance self-test" on page 41
When the programme has ended, the appliance
switches over to normal operation.
The cool-fresh compartment is too warm or too cold.
The standard setting was set too high or too low
(e.g. frost in cool-fresh compartment).
You can set the temperature in the cool-fresh com-
partment 3 settings warmer or colder. If the temper-
ature in the refrigerator compartment is set to the
setting 0, the cool-fresh compartment will have a
temperature close to 0 °C.
Note: Any change to the standard setting will affect
the temperature in the refrigerator compartment and
freezer compartment.
1. Press and hold the freezer compartment
Super button until the display temperature
refrigerator compartment flashes.
2. Press the K/J button to change the setting.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff KI8423D40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff KI8423D40 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info