74888
41
Zoom out
Zoom in
Previous page
1/134
Next page
39
Converting the type of gas
If the appliance is not presetted for the available type
of gas, it must be converted.
The conversion to a different type of gas should be
carried out by a licensed expert, too.
The gas type and pressure that have been preset in
the factory are indicated on the identification plate on
the right external side of the pan drawer.
For converting the appliance to an other type of gas
its injectors, sometime its bypasses as well must be
replaced. The minimum flow must be regulated.
Replacing the injectors
To replace the injectors, proceed as follows:
• Disconnect the hob from the mains.
• Remove the pan supports.
• Remove the burner cap (A) and burner (B) from
the hob (C).
• Take out the injector (D) and replace it with one
suitable for the new type of gas (see section
“General injectors table”).
• Replace the gas label with the new one provided
with the injectors kit.
• Place the burner (B) on the hob (C).
• Lay the burner cap (A) accurately on the
burner (B).
• Place the pan supports lengthways over the hob
on the step at the edge of the hob.
In the event that the appliance has to be converted to
LPG 30/50 mbar the bypass of the taps must be
substituted.
A
B
C
D
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff F 3470 N0 NL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff F 3470 N0 NL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info