109193
20
Zoom out
Zoom in
Previous page
1/108
Next page
Fan OFF Saturation indicator
20
Operating procedure
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Switching the fan ON:
Press the 1, 2 or 3 button.
Switching the fan OFF:
Press the 0 button.
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
The P key for the intensive level
should be pressed when browning
and frying in an open pan.
If you have switched on the hood by
selecting the intensive level, it will be
switched off again automatically after
5 minutes.
If you press the P key while the hood is
running at fan level 1, 2 or 3, the
electronic control will switch back
automatically to the previously selected
fan level after 5 minutes.
If you would like to end the intensive level
before the five minutes have elapsed,
press the 0 key (“Motor off”) or select a
different level. It is possible to switch off
the extraction function at any time by
pressing the 0 key (motor “off”).
Special functions:
Intensive time:
You can set the intensive level running
time to 3, 5 or 10 minutes by simulta-
neously pressing the P key and the 1, 2
or 3 key and you can store this
setting. When delivered, the appliance is
set to five minutes, i.e. the combination
of the P key and the key 2.
Fan follow-on:
Delayed shut-off is possible at any level.
First press the required key 1, 2, 3 or P
and then press the
! key.
The delayed shut-off time for all levels is
ten minu-tes. After these ten minutes,
the ventilation switches off, but the
lighting stays on.
Interval ventilation:
Interval ventilation is a special feature of
this appliance which periodically
activates the fan for five minutes every
hour. You can activate this function by
simultaneously pressing the 0 key and,
depending on the required extraction
capacity, the 1, 2 or 3 key.
This mode of operation is indicated by
alternating illumination of the
! key
together with the corresponding fan level
indicator.
You can switch off interval ventilation by
pressing the 0 key.
Lighting:
Briefly press the
Y
button to switch the
light on and off.
The light can be switched on at any
time, even though the fan is switched off.
Adjusting the brightness:
Hold down the
Y
button until the
desired brightness is obtained.
Light
Intensive setting
Fan follow-on
Fan settings
20


Need help? Post your question in this forum.

Forumrules
1

Forum

neff-drc-109-d90r7-n0

Reset search

  • When I switch the appliance on all the command buttons light up (bright green) but nothing happens. None of the buttons respond and all lights on the command buttons stay on. The actual cooker light does not respond. This is for the D90R7.
    Thank you Submitted on 23-4-2018 at 16:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff DRC 109 D90R7 N0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff DRC 109 D90R7 N0 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info