633846
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Operating the appliance
These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel
Setting the fan
Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on the appliance
1. Press the # button.
The fan starts at setting 1.
2. Press the "+" or "-" buttons to set another fan setting.
Switching off the appliance
Press the
# button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
1. Press the ˜ button.
The intensive setting
˜‚ is activated.
2. Press the ˜ button.
The intensive setting is deactivated.
Note: The intensive setting run time is 6 minutes. Once this
time has elapsed, the appliance switches back to the
ƒ fan
setting.
Fan run-on time
1. Press the 9 button.
The current fan setting and the remaining run-on time in
minutes are displayed alternately in the display panel. The fan
continues to run at the previous setting for 15 minutes. Once
this time has elapsed, the ventilation and lighting
automatically switch off.
2. Press the 9 button.
The fan run-on ends before the end of the remaining run-on
time.
Interval ventilation
With intermittent ventilation, the ventilation switches on
automatically for 10 minutes every hour. After 24 hours, the
appliance switches off.
1. Press the 8 button.
©¨ is shown on the display.
2. Press the 8 button.
The intermittent ventilation switches off.
Lighting
The lighting can be switched on and off independently of the
ventilation.
Press the
6 button.
Setting the brightness
1. Press and hold the 6 button for two seconds.
The brightness is reduced.
2. Press the 6 button.
The maximum brightness is restored.
Saturation display
When the metal grease filter or activated carbon filter is
saturated, the corresponding symbol flashes:
Metal grease filter: ª
Activated carbon filter:
If you have not yet done so, clean the metal grease filter or
replace the activated carbon filter immediately.
For instructions on how to clean the metal grease filter, please
refer to the section "Cleaning and maintenance".
Resetting the saturation indicators
1. Switch off the motor.
2. Press and hold the 7 button for two seconds.
Switching over the display for circulating-air mode
For circulating-air mode, the electronic control display must be
switched over accordingly:
1. Check that the extractor hood is connected and switched off.
2. Press and hold the "+" button for two seconds.
flashes twice, i.e. the electronic control is switched over to
circulating-air mode.
3. Press the "+" button.
flashes once, i.e. the electronic control is switched back to
exhaust-air mode.
Explanation
1 Switch the fan on/off
2 Switch on the fan run-on
3 Switch on the interval ventilation
4 Turn the fan down
5 Display panel
6 Switch up the fan setting
7 Switch on intensive mode
8 Reset the saturation indicator
9 Switch on the lighting

13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff D39G69S0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff D39G69S0 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neff D39G69S0

Neff D39G69S0 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info