495373

Neff C47D42N3 Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
12
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1.Set the operating mode and temperature.
A default cooking time is displayed on the electronic clock.
The
KJ and x (cooking time) symbols light up.
2.Set the cooking time with the rotary selector
(e.g.
‚:„‹ hours).
The new cooking time is saved automatically after 3 seconds.
3.Press the Start button.
The appliance heats up.
In the
é Steam cooking operating mode, the cooking time
does not start counting down until the heating up time has
finished.
Once the cooking time has elapsed, the appliance switches off
automatically.
1.Turn the operating mode selector back to the Û position.
2.Press the KJ clock function button to exit the clock function.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
Bear in mind that food that spoils easily must not stay in the
cooking compartment for too long.
Preselection mode is not possible with some of the automatic
programmes.
When
é Steam cooking, the cooking time does not start until
the heating up time has elapsed. The end of operation which
was set is therefore delayed by the length of time required for
heating-up.
1.Set the operating mode and temperature.
2.Press the clock function button repeatedly until the KJ and
x symbols light up.
3.Set the cooking time with the rotary selector
(e.g.
‚:„‹ hours).
4.Press the clock function button repeatedly until the KJ
and
y symbols light up.
5.Set the end of operation using the rotary selector
(e.g.
‚ƒ:„‹).
6.Press the Start button.
The appliance waits until the appropriate time to switch on (in
the example at
‚‚:‹‹).
The appliance switches off automatically at the time set for the
end of operation (
‚ƒ:„‹). A signal sounds and the y symbol
flashes.
1.Turn the operating mode selector back to the Û position.
2.Press the clock function button to end the preselection mode.
Setting the clock
You can only change the clock when no other clock function is
active.
1.Press the KJ clock function button repeatedly until
the
KJand 3 symbols light up.
2.Set the clock using the rotary selector.
The setting is applied automatically.
Checking, correcting or deleting settings
1.To check your settings, press the KJ clock function button
repeatedly until the corresponding symbol lights up.
2.If necessary, you can correct your setting using the rotary
selector.
3.If you wish to cancel your setting, turn the rotary selector anti-
clockwise to the original value.
Automatic programmes
The automatic programmes make preparing food very easy.
There are 9 programme groups with a total of 40 programmes.
In this section, you will find out
■ how to set one of the automatic programmes
■ Hints and tips on the programmes
■ Which programmes you can set (programme tables)
Setting a programme
Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
Example in the picture: you want to steam 500 g fresh chicken
breast.
■ “Meat, poultry” programme group
■ “Chicken breast, fresh, steamed” programme
Selecting a programme group
1.Press on the operating mode selector to turn on the
appliance.
2.Press the X button.
The first programme group is shown on the text display.
3.Turn the operating mode selector until the desired
programme group appears.
3
9HJHWDEOHV
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Neff C47D42N3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Neff C47D42N3 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neff C47D42N3

Neff C47D42N3 User Manual - German - 32 pages

Neff C47D42N3 User Manual - Dutch - 32 pages

Neff C47D42N3 User Manual - French - 32 pages

Neff C47D42N3 User Manual - Polish - 32 pages

Neff C47D42N3 User Manual - Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info