Manual Nedis WIFIHTPL20FWT (page 5 of 44) (All languages)

726189

Zoom out

Zoom in

1/44

• Do not pull the power cord to shut down the

heater, always use the on/o switch.

• Do not pull the power cord to move the product.

• Fully extend the power cord and make sure the

power cord does not contact the product.

• In case of failure, shut down the heater, unplug

the power cord and have it serviced by a

qualied technician.

Movable with wheels (image C)

1. Place A

upside down.

2. Place A

on the bottom of A

Make sure the screw holes are aligned.

3. Use a screw driver to mount A

to A

4. Turn the heater upright and plug the power cord

in a grounded wall socket.

Wall mounted heater (image D)

WARNING

• Mount the product at least 150 mm from the

oor and at least 500 mm from the ceiling.

• Do not mount the product directly under a wall

socket.

• Check whether the wall can hold the weight of

the product.

• Use anchors suitable for your type of wall only.

1. Drill 2 holes, as indicated in image D.

2. Insert the anchors A

3. Insert the screws A

, let them protrude 6 mm

from the wall.

4. Hang the heater on the wall.

5. Plug the power cord in a wall socket.

The product will switch o automatically when

overheating.

Setting date and time

1. Turn on the power switch A

2. Press B

to turn on the heater.

3. Press B

to turn on the display.

4. Press B

to open the date and time setting.

5. Press B

for 3 seconds to change the time.

6. Press B

or B

to change the hour.

7. Press B

for 3 seconds.

8. Press B

or B

to change the minutes.

9. Press B

to conrm the time and exit or wait

for 5 seconds.

Setting the temperature manually

Press B5 or B8 to change the temperature.

Use the Nedis SmartLife app

You can control the product with your phone and

the Nedis SmartLife app.

1. Download the Nedis SmartLife app for Android

or iOS on your phone via Google Play or the

Apple App Store.

2. Create an account with your mobile phone

number or your e-mail address.

3. Switch on the heater using power switch A

4. Tap + in the Nedis SmartLife app.

5. Select the device type you want to add from the list.

6. Conrm the indicator LED B

is blinking fast, or hold

the + button B

for 5 seconds to reset the heater.

7. Follow the instructions in the Nedis SmartLife app.

Make sure you connect the product to a 2.4 GHz

Wi-Fi network.

8. After adding the product, you can rename it and

assign it to a room. After conrming you can

control the heater with your smart phone.

For more information about how the app works,

consult the extended manual online.

To connect your SmartLife account to Amazon Alexa

and/or Google Home, set it up using the “Smart Life”

action or skill. For more details check the instruction

on either Amazon or Google.

Specications

Product Panel convection heater

Article number WIFIHTPL20FWT

Dimensions (l x w x h) 830 x 260 x 520 mm

(with wheels)

830 x 90 x 465 mm (wall

mounted)

Weight 7.9 kg

Input voltage AC 220 - 240 V ~ 50

/ 60 Hz

Rated input power 1800 - 2000 W

Setting 1000 W / 2000 W

Overheating protection

temperature

105 °C

IP rating IP24

WIFIHTPL20FWT_MAN_COMP_0919_(19350 1422)_v02.indd 5 30-8-2019 12:25:27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFIHTPL20FWT in the language / languages: All languages as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nedis WIFIHTPL20FWT Manual

Product: