726190
4
Zoom out
Zoom in
Previous page
1/40
Next page
4
a
Quick start guide
Electric fan heater WIFIFNH20CWT
For more information see the extended
manual online: ned.is/wifnh20cwt
Intended use
The Nedis WIFIFNH20CWT is an electric fan heater used for heating
rooms.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Control panel
Air outlet
Handle
Air inlet grid
Power switch
Plug
Safety instructions
-
WARNING
Only use the product as described in this manual.
Any other use may cause re, electric shock, and/or injury to
persons and may void the warranty.
Any use of not recommended attachment or accessory may
cause injury to persons, or damage.
Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately.
Do not disassemble or try to repair the product.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
Make sure that the electrical supply in your area matches a
voltage of 220 – 240 VAC and a frequency of 50 Hz.
Make sure that no other high current appliances are plugged
into the same circuit with your product. Overloading may occur.
Disconnect the product from the power outlet and other
equipment if problems occur.
Do not expose the product nor the cord to water, any other
liquid or moisture.
Do not use the product where splashing of water might occur
e.g. bathrooms, swimming pools or close to a washbowls.
Fully extend the power cord and make sure the power cord does
not contact the product.
Do not cover the power cord by e.g. carpets, rugs or furniture.
Ensure people do not trip over the cord.
Only plug the cable into a wall outlet. Do not use extension cords.
Do not use the product when the cord or plug is damaged.
Turn o the main power switch before unplugging the power cord.
Do not unplug the product by pulling on the cable. Always
grasp the plug and pull.
Do not let children play with parts of packaging such as plastic
bags, because of danger of suocation.
Close supervision is necessary when the product is used by or
near children, animals or inrm persons. Do not allow children
to play with it or touch it.
Do not leave the product unattended when switched on.
Do not use the product in rooms where ammable liquids or
gases are used or stored.
An area of one meter around the product has to be free from
animals and any combustible materials, such as curtains and
bedding or walls. Do not point the outlet at any of these.
Do not obstruct or cover the product’s air inlet or outlet grid.
Do not place any objects on the product.
Do not locate the product immediately below a power outlet.
Do not move the product during operation.
After use only transport the product by using the handle.
Only handle the product with dry hands. Handling with wet
hands might cause an electric shock.
Switch o and unplug the product when not in use or before
maintenance.
Do not pull the power cable over sharp edges.
Switch on the heater
1. Insert the plug into a power outlet.
2. Then turn on the main power switch A
5
.
Now the heater is in “stand-by” mode, with only the temperature
indicator shown.
Use the control panel (image B)
On / o button
Display
Low power indicator
Oscillation button
Mode indicator
Timer indicator
Timer button
Status indicator
Power button (low, high
or fan only)

High power indicator

Set temperature button
Stand-by
1. Press B
1
to wake the product. B
5
and B
8
will light up.
2. Press B
1
again to change back to stand-by.
4
The fan will continue to turn for 30 seconds to cool down.
Low – high power
1. Press B
9
to switch between low power, high power or fan
only.
4
B
3
lights up for low power.
4
B
q
lights up for high power.
Timer
1. Press B
7
to activate the timer, B
6
will light up.
4
The time will show at B
5
.
4
The time can be set between 1 to 8 hours.
2. Hold B
7
to deactivate the timer.
Oscillation
1. Press B
4
to activate the oscillation.
2. Press B
4
again to deactivate the oscillation.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis WIFIFNH20CWT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFIFNH20CWT in the language / languages: All languages as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info