812821
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
Do not drop the product and avoid bumping.
This product may only be serviced by a qualied
technician for maintenance to reduce the risk of
electric shock.
Unplug the product from the power source and
other equipment if problems occur.
Consult the local laws and regulations for this
product before installing and using.
Mounting the bracket (image C + D)
-
Ensure that the power group that you want to
connect the product to is switched o.
4Keep the product in a dust free area when
drilling.
1. If there is no power cable available in the desired
location, drill a hole for a power cable in the
desired location.
2. Pull a power cable through the drilled hole.
3. Pull the power cable through the wire hole A8.
4. Place the bracket A9 in the desired location.
Follow steps 5-7 for stone/concrete surfaces.
Continue to step 8 for wood surfaces.
5. Use the bracket A9 to mark the drill locations
with a pencil.
6. Drill two holes based on the size of the plugs
Ar.
7. Insert the plugs Ar into the holes.
Do not overtighten the screws, this will deform the
bracket.
8. Fasten the bracket in the desired location with
the bracket mounting screws A5.
9. Strip the power cable to expose the wires.
10. Attach the wires to the terminal block A7.
Mounting the product (image E)
1. Align the camera A2 with the bracket A9
2. Fasten the camera A2 to the bracket A9 with
the camera mounting screws A6.
Preparing the product
4Use an SD card with a minimum of 8 GB and a
maximum of 128 GB.
1. Insert the new SD card into the SD card slot Aw.
2. Turn the power group that the product is
connected to on.
The product switches on automatically.
a Quick start guide
Outdoor Camera
with light
WIFICOL20BK
For more information see the extended
manual online: ned.is/wicol20bk
Intended use
The Nedis WIFICOL20BK is an IP security camera with
a viewing angle of 120 degrees.
If the security camera detects movement, you will
receive a warning message on your phone.
With the app you can watch live video images, play
back, but also listen in and talk back.
Consult the local laws and regulations for this
product before installing and using.
Any modication of the product may have
consequences for safety, warranty and proper
functioning.
Main parts (image A)
1 Microphone
2 Camera
3 PIR sensor
4 Status indicator LED
5 Bracket mounting
screw
6 Camera mounting
screw
7 Terminal block
8 Wire hole
9 Bracket
q Reset button
w SD card slot
e Speaker
r Plug (6x)
The overview screen of the security
camera (image B)
1 Screenshot
2 Playback
3 PIR
4 Record
5 Night Mode
6 Light
Safety instructions
-
WARNING
Ensure you have fully read and understood the
instructions in this document before you install
or use the product. Keep the packaging and this
document for future reference.
Only use the product as described in this
document.
Do not use the product if a part is damaged or
defective. Replace a damaged or defective
product immediately.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis WIFICOL20BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFICOL20BK in the language / languages: All languages as an attachment in your email.

The manual is 1.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info