812978

Nedis WIFIACMB1WT7 Manual

5
Zoom out
Zoom in
Previous page
1/40
Next page
5
• If the product is immersed in water, do not touch the product or
the water.
• Shut o the main power grid and carefully remove the plug from
the power outlet.
• After the product has been immersed or covered in water or
other liquids, do not use the product again.
• Keep the product away from heat sources. Do not place the
product on hot surfaces or near open ames.
• Do not use the product near explosive or ammable materials.
• Do not insert any objects into the product.
• Do not obstruct or cover the product’s air inlet or outlet grid.
• The appliance shall be installed in accordance with national
wiring.
• Always disconnect the product from the power outlet when
cleaning or moving the product.
• Do not pull the power cable to move the product.
• Unplug the product from the power source and other equipment
if problems occur.
• Do not unplug the product by pulling on the cable. Always grasp
the plug and pull.
• Switch o the main power switch before unplugging the power
cord.
• Do not use the product when the cord or plug is damaged.
• Make sure that the electrical supply in your area matches a
voltage of 220 – 240 VAC and a frequency of 50 Hz.
• Connect to a grounded socket only.
• If necessary, use an earthed extension cable of a suitable
diameter.
• Fully extend the power cord and make sure the power cord does
not contact the product.
• When using an extension cord, use one which is as short as
possible and fully extended.
• Do not use external timers or remote control systems to switch
the product on or o.
• Ensure people do not trip over the cord.
• Make sure that the power cable cannot become entangled and
does not hang over the edge of a worktop.
• Do not leave the product unattended when switched on.
• R290 is a refrigerant gas that complies with the European
directives on the environment.
• Be aware that refrigerants can be odorless.
• Place the product in an area without any continuous sources of
ignition (for example: open ames, gas or electrical appliances in
operation).
• Only install, operate and store the product in a room with a oor
area above 7 m2.
• Only store the product in a well-ventilated area.
• Store the product in such a way as to prevent mechanical failure.
• When the product is installed, operated or stored in a
non-ventilated area, make sure the room is designed to prevent
the accumulation of refrigerant leaks resulting in a risk of re or
explosion due to ignition of the refrigerant caused by electric
heaters, stoves, or other sources of ignition.
• Only persons with a current valid certicate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specication, can work on or
break into a refrigerant circuit.
• Servicing can only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel can only be carried out
under the supervision of the person competent in the use of
ammable refrigerants.
• When defrosting and cleaning the product, do not use any
means other than those recommended by the manufacturing
company.
• Do not puncture or heat any part of the refrigerant circuit.
• This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
Installing the product
-
Place the product on a stable and at surface.
-
Only move the product in an upright position.
-
Leave a minimum of 0.5 m space around the air inlet and outlet
to allow a good circulation of airow.
-
If the product has been tilted, allow it to stand upright for 2
hours before plugging it in.
-
Only install, operate and store the product in a room with a oor
area above 7 m2.
-
Keep the product at a distance from ammable objects such as
furniture, curtains and similar.
-
Do not block ventilation openings and make sure that there is
enough space around the product.
Assembling the exhaust (image C)
-
Only use the provided exhaust hose.
-
Do not block the exhaust hose, this may cause overheating.
1. Assemble the exhaust hose A5, the exhaust nozzle A4 and
the exhaust hose connector Ay.
2. Slide Ay over the air outlet Ae.
3. Extend A5 up to 1500 mm.
-
Do not twist the exhaust hose.
-
Ensure that the exhaust hose does not kink.
4. Assemble the window kit A6 with the fasteners A7.
5. Install A6 in the window opening.
6. Tighten A7.
7. Snap A4 into A6 and fasten with the exhaust nozzle screw
Ai.
4Place the product on a at and dry surface.
Assembling the continuous drainage (optional)
1. Open the continuous drainage outlet Ar.
2. Connect Ar to a water container or drainage system (not
included).
Installing the Nedis SmartLife app
1. Download the Nedis SmartLife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your
e-mail address and tap Continue.
4. You will receive a verication code on your mobile phone or
e-mail address.
5. Enter the received verication code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location, choose the rooms you want to connect with
and tap Done.
Adding the product to the SmartLife app (image
D)
1. Switch on the product.
2. Tap + in the Nedis SmartLife app.
3. Select the device type you want to add from the list.
4. Conrm the Wi-Fi indicator LED B6 is blinking fast. Or reset the
product during standby mode: Press and hold the fan speed
button B8 for 5 seconds until the product emits a tone and B6
starts blinking.
5. Follow the instructions in the Nedis SmartLife app.
4Make sure you connect the product to a 2.4 GHz Wi-Fi network.
6. Rename the product after it has been found and added.
7. After conrming you can control the product with your
smartphone.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis WIFIACMB1WT7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFIACMB1WT7 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info