726369
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
Installation of the Wi-Fi Smart Ceiling Light (image B – D)
-
Make sure the central power is switched o.
1. Fasten A
1
with the screws A
4
.
2. Connect the wires from the ceiling to the connector A
8
and fasten the
screws.
3. Attach A
2
to A
1
by fastening A
3
into the screw holes.
4. Switch on the central power.
5. Switch on the lamp.
6. In the Nedis SmartLife app, tap + D
3
.
7. Under Search Device, select the lamp from the list of available devices.
8. Check if the lamp is blinking. If so, tap to conrm.
4
If the lamp does not blink, turn the lamp o and on 3 times and check again.
9. Enter the password of the 2,4 GHz Wi-Fi network to which your phone is
connected and tap Conrm. The Nedis SmartLife app will now search for the
lamp.
10. Rename the lamp after it has been found and added.
4
If the regular connection method fails, the lamp can be connected using AP
mode:
1. Tap + D
3
.
2. Under Add Manually, tap Smart Bulb.
3. Tap AP Mode in the top right corner.
4. Follow steps 8 till 10 of the regular connection method.
Specications
Product Wi-Fi Smart Ceiling Light
Article number WIFILAW10WT
Dimensions Ø 170 x 38 mm
Weight 360 g
Power supply 220 – 240 V AC 50 – 60 Hz
12 W
Wireless technology Wi-Fi
Operating temperature -10 - 40 °C
Frequency Range 2412 - 2472 MHz
Max. radio transmit power 18 dBm
Brightness 850 lm
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis WIFI LAW10WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFI LAW10WT in the language / languages: All languages as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info