727041
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
a
Quick start guide
Vacuum cleaner VCCS200RD
For more information see the extended manual
online: ned.is/vccs200rd
Intended use
The product is exclusively intended as a vacuum cleaner for indoor use.
The product is not intended for professional use.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Handle
Power button
Eco button
Charging indicator LED
Wand release button
Extension wand
Brush release button
Floor brush
LED light

Battery pack

Battery pack release button

Dust collector release button

Dust collector

Dust discharge button

Charging base

Mains adapter cord

Accessory nozzle

Brush
Safety instructions
-
WARNING
Only use the product as described in this manual.
Only use the provided charger and charging base.
Check if the voltage is consistent with the product before charging.
Only charge the product if the plug is compatible with the power
outlet. Do not use adapters. Do not change the plug.
Do not use the product if a part is damaged or defective. Replace
a damaged or defective device immediately.
This product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
Do not immerse the product in water.
Do not unplug the charger by pulling on the cable. Always grasp
the plug and pull.
Do not plug or unplug the charger with wet hands.
Do not use the product while it is being charged.
Do not put any objects into openings. Do not use with any
opening blocked. Keep free of dust, lint hair etc.
Keep hair, loose clothing, ngers and all body parts away from
openings and moving parts.
Do not vacuum hard or sharp objects such as glass nails, screws,
coins etc.
Do not vacuum hot coals, cigarettes, matches or any hot smoking
or burning objects.
Do not use without lters in place.
Use extra care when vacuuming on stairs.
Do not vacuum ammable or combustible materials (lighter uid,
gasoline, etc.) or use in the presence of explosive liquids or vapor.
Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
Do not use in an enclosed space lled with vapors given o by
oil-based paints, paint thinner, moth proong, ammable dust, or
other explosive or toxic vapors.
Only use on dry, indoor surfaces.
Store your appliance indoor in a cool, dry area.
Keep the end of the hose, wands and other openings away from
your face and body.
Do not use the cleaner to clean your pets or any animal.
Keep the head (eyes, ear, mouth, etc.) away from the openings,
when the cleaner is working.
If you hear a squeaking sound and suction power is reduced,
clear of blockages and clean the air lter.
Do not open the battery pack or the motor area. There are no
user serviceable parts inside.
Assembling the product (image B)
1. Insert A
q
into A
1
.
2. Insert A
6
into A
1
.
3. Insert A
8
or A
i
into A
6
.
Charge the product (image C)
1. Attach A
y
to the wall using 2 screws and wall plugs.
2. Insert A
u
into A
y
.
3. Connect A
u
to a power outlet.
4. Place the cleaner in A
y
.
4
A
4
starts blinking to indicate the product is charging.
4
The three bars indicate the current battery level.
4
When charging is complete, A
4
turns o.
-
Only charge the product indoor, with ambient temperature
between 4°C and 35°C.
-
Unplug the charging base when charging is complete. Do not
overcharge the battery.
-
Always remove the product from the charging base before
assembling or removing accessories.
-
Always remove the product from the charging base before using it.
-
The motor automatically switches o when the product
overheats. When the product overheats:
1. Press A
2
to switch o the product.
2. Remove A
q
.
3. Allow the product to cool down for approximately 0.5 hour
before using again.
Using the product
1. Remove the product from A
y
.
2. Press A
2
to switch on the product.
3. Press A
2
again to switch o the product when you are nished.
4. Place the product on A
y
.
Emptying the dust collector
1. Press A
t
while holding A
r
above a dust bin.
-
It is not necessary to disassemble the product to empty A
r
.
Cleaning the dust collector (image D)
-
Press A
e
to release A
r
.
-
Disassemble A
r
and D
12
.
-
Rinse A
rt
and D
12
in water.
-
Let all parts dry completely before reassembling the product.
-
The lters should be cleaned every 6 months or as soon as
suction power is weakened.
-
The lters should be checked regularly for signs of damage,
preferably after each cleaning task.
-
The lters must be replaced immediately if they are damaged.
-
Always disconnect the vacuum cleaner from the power outlet
before checking the lters.
Specications
Product Stick vacuum cleaner
Article number VCCS200RD
Dimensions (l x w x h) 980 x 240 x 200 mm
Battery voltage 18.5 V
Maximum power 100 W
Suction power 7000 Pa
VCCS200RD_MAN_COMP_0919_(19474 1422)_v01_00.indd 4 16-9-2019 15:40:49
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis VCCS200RD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis VCCS200RD in the language / languages: All languages as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info