726924
4
Zoom out
Zoom in
Previous page
1/32
Next page
4
4. Select "SPBT6000" from the list of available Bluetooth devices on
your device.
4
A
6
lights up to indicate pairing is successful.
4
The speaker will switch o automatically after 45 minutes of
inactivity.
Link multiple speakers
4
You can link up to 100 SPBT6000BK speakers to each other.
1. Press A
9
on the rst speaker to switch it on.
2. Press A
8
to enter Link mode. A
56
will start blinking.
3. Press A
9
on the second speaker to switch it on.
4. Press A
q
. A
5
starts blinking.
4
When the speakers are successfully linked, A
5
lights up
continuously on the master speaker and the subspeaker will blink.
4
A
5
stops blinking after 2 minutes to indicate Link mode has
ended.
5. Repeat these steps for every speaker you want to link.
6. Connect your audio source to the master speaker to play music.
See paragraph Bluetooth pairing.
Controlling the music
1. Press A
e
to play or pause the music.
2. Press A
w
or A
r
to change the volume.
3. Press and hold A
r
for 2 seconds to skip to the next track.
4. Press and hold A
w
for 2 seconds to skip to the previous track.
Wired connection
1. Connect a 3.5 mm audio cable into A
u
and the other end to
your audio source.
4
A
4
lights up.
2. Start playing music.
Using a voice assistant
Press A
e
twice to activate the voice assistant on your audio
source.
Using the speaker as a powerbank
Connect a USB cable to A
i
and the device you want to charge.
Resetting the speaker
Push a thin rod, like a paper clip, in A
y
. The speaker will reset.
Specications
Product Bluetooth® speaker
Article number SPBT6000BK
a
Quick start guide
Bluetooth® speaker SPBT6000BK
For more information see the extended manual
online: ned.is/spbt6000bk
Intended use
The product is exclusively intended to be used as a Bluetooth speaker.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Bluetooth® speaker
Speaker grill
Carrying strap
AUX indicator LED
Multi-link indicator LED
Bluetooth indicator LED
Battery indicator LED
Multi-link master button
Power switch

Multi-link sub button

Volume- button

Play / pause / voice assistant

Volume+ button

Power input

Reset opening

3.5 mm input

USB power output
Safety instructions
-
WARNING
Read the instructions before use.
Only use the product as described in this manual.
Do not use a damaged product.
This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
Charging the product
4
The battery is only partially charged upon delivery. Fully charge
the battery before rst use.
1. Connect the power cable to A
t
and a power outlet.
2. Charge the battery for at least 6 hours when you use it for the
rst time.
Bluetooth pairing
1. Press A
9
to switch on the product.
2. Press A
e
for 2 seconds.
4
The speaker says: "Bluetooth pairing".
3. Enable bluetooth on the device you want to pair the speakers
with.
SPBT6000BK_MAN_COMP_(19519 1422)_V00_04.indd 4 6-9-2019 14:57:10
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis SPBT6000BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis SPBT6000BK in the language / languages: All languages as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info