812915
5
Zoom out
Zoom in
Previous page
1/40
Next page
5
Controlling the music
Use your audio source to control the audio volume
and playback.
Light modes
Press light button A5 to cycle through the
dierent light modes.
Overview of the light modes
1. RGB cycling colours
2. Solid red
3. Pulsing red
4. Solid green
5. Pulsing green
6. Solid blue
7. Pulsing blue
8. Random RGB colours
9. No lights
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product SPBT1003BK from our brand Nedis®,
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the
safety datasheet if applicable) can be found and
downloaded via:
nedis.com/spbt1003bk#support
For additional information regarding the
compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
During charging the product must be placed in a
well-ventilated area.
Some wireless products may interfere with
implantable medical devices and other medical
equipment, such as pacemakers, cochlear
implants and hearing aids. Consult the
manufacturer of your medical equipment for
more information.
Do not use the product at locations where the
use of wireless devices is prohibited due to
potential interference with other electronic
devices, which may cause safety hazards.
Charging the product
1. Plug the micro USB cable A7 into the micro
USB port A4.
2. Plug the other end of A7 into a computer or
power adapter.
3. Plug the power adapter into a power outlet.
The charging indicator LED A3 burns red to
indicate the product is charging.
4A3 switches o when the battery is fully
charged.
Switching on the product
Use A6 to switch the product on or o.
Pairing the product to Bluetooth
audio source
After switching on the product, A3 blinks blue and
the product emits a tone to indicate pairing mode
is active.
4The product reconnects to any nearby, previously
paired devices that are switched on.
1. Enable Bluetooth on the device you want to pair
the speakers with.
2. Select "SPBT1003BK" from the list of available
Bluetooth devices on your device.
When paired successful, A3 blinks blue slowly and
the product emits a tone.
Wired connection
1. Plug the AUX cable A8 into the AUX port A2.
2. Plug the other end of the AUX cable into an AUX
output of your audio source.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis SPBT1003BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis SPBT1003BK in the language / languages: All languages as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info