Common product interface (these will show on some products, not on all)
Schedule
1. Add timing to add any recurring behaviour.
2. Set the time when this specific product should switch on/off
3. Indicate on which days of the week to repeat this
4. Set whether to switch the device on or off
5. Tap Save on the top right corner
Timer
1. Add a timer that will count down after which the product will be switched on / off (the timer is set in
hours and minutes)
2. The timer can easily be overruled by manually switching the product
Statistics
1. Actual usage (Current, Power, Voltage)
2. Monthly usage
3. Daily usage is shown after a month is selected
Product menu
Tap the button on the upper right corner on the product page.
Through this menu you can do the following (depends on the type of product)
a. Change the products name (also used by Amazon Alexa and Google Home)
b. Set device sharing to give other people access to this product, for this family members need to be
added
c. Create a group to control multiple similar products at once.
Cameras only:
d. Basic feature setting where you can switch status indicator, watermark, audio mode or flip the image
for ceiling mounted camera.
e. Sound detection can be switched on/off and the sensitivity can be set
f. Motion detection can be switched on/off and the sensitivity can be set
g. Storage can be monitored or formatted
