812923
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
a Quick start guide
Telescope SCTE7070WT
For more information see the extended manual online:
ned.is/scte7070wt
Intended use
The Nedis SCTE7070WT is a telescope with a maximum focal length
of 700 mm.
This product is included with three eyepieces, an erecting lens and
a Barlow lens.
This product can be used by children aged from 6 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Specications
Product Telescope
Article number SCTE7070WT
Aperture 70 mm
Objective focal length 700 mm
Max. tripod height 125 cm
Finder scope 5 x 24
Diagonal Prisms 90 °
Acceddoness 1.25"
Eyepiece Magnication Magnication
with 1.5x
erecting lens
Magnication
with 3x Barlow
lens
4 mm 175 x 263 x 525 x
12.5 mm 56 x 84 x 168 x
20 mm 35 x 53 x 105 x
Main parts (image A)
1 Eyepiece (3 lenses included)
2 Erecting lens / Barlow lens
3 Focus tube
4 Finder scope bracket
5 Finder scope
6 Bracket mounting screw
7 Bracket
8 Azimuth lock
9 Main body
q Objective lens
w Objective lens cover
e Diagonal periscope viewer
r Eyepiece attachment screw
t Focus knob
y Lens holder
u Micro adjustable altitude
control
i Tripod head
o Tripod
p Tripod leg lock
Safety instructions
-
WARNING
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
Place the product on a stable and at surface.
Do not use the product to watch the sun or any other light
source. Looking directly at the sun can cause permanent eye
damage.
Never use your telescope to project sunlight onto another
surface, the internal heat build-up will damage the optical
elements of the telescope.
Do not drop the product and avoid bumping.
Do not expose the product to water or moisture.
Children of less than 3 years should be kept away.
This product can be used by children aged from 6 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
Usage by children should be supervised at all times.
This product may only be serviced by a qualied technician.
Installing the product
1. Unlatch the three tripod leg locks Ap and pull each of the legs
Ao out to full extension.
2. Spread Ao and lock Ap in place to secure Ao.
3. Connect the three legs Ao to the tripod head Ai using the
provided nuts and bolts.
4. Install the lens holder Ay between Ao using the provided
wingnuts and bolts.
5. Place the bracket A7 into Ai and rotate the bracket mounting
screw A6 to tighten A7.
6. Place the main body A9 in A7 and rotate the locking screws
A6 to secure A9.
7. Slide the micro adjustable altitude control Au through the hole
on the side of A7.
8. Tighten the other end of Au with the screw to A9.
9. Unscrew and remove the bolts of the nder scope bracket A4.
10. Place A4 onto A9 and tighten the bolts.
4Make sure A5 is facing the same direction as the objective lens
Aq.
11. Install the diagonal periscope viewer Ae into the focus tube
A3.
-
Make sure the end of Ae without the screw is inserted into
A3.
12. Place the desired eye piece A1 into Ae. Tighten the screw to
secure the eyepiece.
-
Only use the Barlow lens A2 without Ae to get the best
viewing results. Place the Barlow lens A2 directly into A3.
4Place one of A1 into the erecting lens or Barlow lens A2 to
increase the magnication.
Using the product
-
Make sure the product is placed on a at and stable surface.
-
Only use the erecting lens A2 to observe landscapes, not
astronomical observations.
1. Remove the objective lens cover Aw.
2. Look through the nder scope A5 to nd the target object.
Untight the Azimuth lock A8 to change the horizontal viewing
angle of A9.
Adjust Au to change the vertical viewing angle of A9.
3. Untighten the adjustment nuts of A5 if you do not see the
object.
4. Move A5 until you can see the object.
5. Tighten the adjustments nuts of A5 again.
6. Look through A1 to see the target object.
7. Use the focus knob At to focus on the object.
-
Apply small and slow adjustments for focusing.
-
Place Aw back on the product when not in use.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis SCTE7070WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis SCTE7070WT in the language / languages: All languages as an attachment in your email.

The manual is 0.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info