812859
5
Zoom out
Zoom in
Previous page
1/36
Next page
5
Spraying a spray of steam
Press the spray button A3 to spray steam.
After use
1. Set the thermostat dial Ar to the minimum position.
2. Place the product on the back cover Aw.
3. Unplug the power cable A1 from the power outlet.
Troubleshooting
Problem Possible cause Possible solution
The product doesn’t
produce heat.
The thermostat
dial Ar is rotated
to OFF.
Set the thermostat
dial Ar to the
correct setting for
your fabric.
The product is not
plugged in.
Plug the power
cable A1 into a
power outlet.
The burst of steam
doesn’t function.
The burst of steam
function has been
used to often.
Continue ironing in
horizontal position
and wait a while
before using the
burst of steam
function again.
The water reservoir
A6 is empty.
Fill the water
reservoir A6 with
distilled water.
The ironing plate
A8 leaks water.
The thermostat dial
Ar is out of the
steam range.
Set the thermostat
dial Ar to the MAX
position.
The product has not
fully heated up yet.
Wait until the LED
indicator Ae
switches o to
indicate the product
is heated up.
The amount of
water exceeds the
MAX indicator of
the water reservoir
A6.
Pour out the excess
water from the
water reservoir A6.
The product doesn’t
produce enough
steam.
Set the steam
selector A4 to 0.
Set the steam
selector A4 to
the desired steam
output.
The steam holes
A9 are blocked.
Clean the steam
holes A9 with
distilled water.
The water reservoir
A6 is empty.
Fill the water
reservoir A6 with
distilled water.
The spray nozzle
A7 doesn’t spray.
There is not enough
pressure or air inside
of the product.
1. Push the spray
nozzle A7 by
hand.
2. Push the spray
button A3
multiple times.
Maintenance
-
Disconnect the product before cleaning.
-
Before cleaning and maintenance, switch o the product and
disconnect the power. Let the product cool down completely.
-
Do not use aggressive chemical cleaning agents such as
ammonia, acid or acetone when cleaning the product.
-
Do not clean the inside of the product.
-
Disconnect the product from the power source before service
and when replacing parts.
1. Clean the product regularly with a soft, clean, dry cloth. Avoid
abrasives that can damage the surface.
2. Clean the ironing plate A8 with a damp cloth and a non-
abrasive cleaner.
3. Clean the ironing plate A8 with a damp cloth with vinegar if
ber is stuck to the ironing plate A8.
4. Remove any limescale from the steam holes A9 with a
toothpick.
5. Empty the water reservoir A6.
Disposal The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
c Kurzanleitung
Dampfbügeleisen IRON1000
Weitere Informationen nden Sie in der erweiterten
Anleitung online: ned.is/iron1000
Bestimmungsgemäße Verwendung
Dieses Produkt ist ein Dampfbügeleisen, das für eine breite Auswahl
von Stoen verwendet werden kann.
Dieses Produkt ist dafür gedacht, Knitter und Falten aus Stoen zu
entfernen.
Dieses Produkt ist nur zur Verwendung in Innenräumen gedacht.
Jegliche Modikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.
Kinder ab dem achten Lebensjahr und Personen mit
eingeschränkten körperlichen, sensorischen oder geistigen
Fähigkeiten oder ohne ausreichende Erfahrung und Kenntnis dürfen
dieses Produkt nur dann verwenden, wenn sie beaufsichtigt werden
oder in die sichere Benutzung des Produkts eingewiesen wurden
und die bestehenden Gefahren verstehen. Kinder dürfen nicht mit
dem Produkt spielen. Reinigung und Wartung durch den Benutzer
dürfen nicht von unbeaufsichtigten Kindern durchgeführt werden.
Das Produkt ist zur Verwendung in Haushaltsumgebungen
für typische Haushaltsfunktionen gedacht, die auch von nicht
fachkundigen Benutzern ausgeführt werden können, wie z.B.:
in Geschäften, Büros und ähnlichen Arbeitsumgebungen,
Bauernhäusern, von Kunden in Hotels, Motels und anderen
Unterkünften und/oder in Pensionen.
Hauptbestandteile (Abbildung A)
1 Stromkabel
2 Dampfstoßtaste
3 Sprühtaste
4 Dampfregler
5 Wassertankabdeckung
6 Wasserbehälter
7 Sprühdüse
8 Bügelsohle
9 Dampöcher
q Gri
w Hintere Abdeckung
e LED-Anzeige
r Thermostatdrehrad
t Messbecher
Sicherheitshinweise
-
WARNUNG
Vergewissern Sie sich, dass Sie die Anweisungen in diesem
Dokument vollständig gelesen und verstanden haben, bevor Sie
das Produkt installieren oder verwenden. Heben Sie die
Verpackung und dieses Dokument zum späteren Nachschlagen
auf.
Verwenden Sie das Produkt nur wie in diesem Dokument
beschrieben.
Önen Sie das Produkt nicht. Es benden sich keine vom
Benutzer zu wartenden Teile im Inneren.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis IRON1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis IRON1000 in the language / languages: All languages as an attachment in your email.

The manual is 2.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info