812809
6
Zoom out
Zoom in
Previous page
1/44
Next page
6
Explanation of the safety symbols on the
product
Icon Description
To avoid overheating, do not cover the product.
Indication for a hot surface. Contact may cause
burns. Do not touch.
Bathroom zones (image B)
4Never use the product while taking a shower or bath. This might
cause an electric shock.
Bathroom Shower room Minimum IP
rating
0The area inside the
bath.
The area inside the
shower basin.
IP67
1The area is the same
width as zone 0 (the
width of the bath)
extending to 2.25 m
above the nished
oor level.
The area is 2.25 m
from the nished
oor level or the
height of the xed
shower head.
IP65
2The area is the same
height as zone 1 (2.25
m), extended to 0.6 m
around the bath.
The area is the same
height as zone 1,
extended to 0.6 m
around the shower
basin.
IP44
3Remaining space Remaining space IP21
Installing the product (image C)
4Only install the product in zone 3, at least 1.8 m above the
ground .
1. Drill holes with a diameter of 8 mm and place the plugs Ae C.
2. Insert the screws Aw, let them protrude 6 mm from the wall.
3. Attach the bathroom heater A9 to the wall.
4. Make sure the product hangs secure.
Inserting the batteries (image D)
1. Open the battery compartment Ag.
2. Place the battery.
3. Close Ag.
Setting the time
4Time is only adjustable by remote control.
1. Press the set button Ay to display the hour.
2. Press the OK button Au to set the current hour.
3. Press Ay to display the minute.
4. Press Au to set the current minute.
5. Press Ay to display the day of the week.
6. Press Au to set the current day.
D1 Monday
D2 Tuesday
D3 Wednesday
D4 Thursday
D5 Friday
D6 Saturday
D7 Sunday
7. Press Au to conrm the setting.
Switching on the product
1. Plug the power cable Ar into a power outlet.
2. Press the power button Aq to switch on the product.
4The product is now in standby mode.
4When you switch on the product it makes a beep and the
display shows a “5” (Standby).
4When the product is switched on (after a long period of time),
the product may emit some smell and fumes.
3. Press the on/o button At to switch between standby and on.
4You can control all the functions of the product with the remote
control and a selection of the functions with the buttons on
the display.
4The display switches on.
Switching between modes
1. Repeatedly press mode button A8 to switch between:
-Fan
-Half power
-Full power
-Standby
4If both the half power indicator A3 and the full power
indicator A2 are switched on, the product is in full power
mode.
2. Press At again to switch o the product.
4The fan stops after 30 seconds in standby.
4The default temperature is 23ºC when the temperature LED
A5 is switched o.
Setting the temperature
4Temperature setting is only adjustable by remote control.
4The display shows the current room temperature when the
product is in standby mode.
4The default temperature setting is 23°C.
1. Press the temperature up and down buttons Ai to adjust the
set room temperature.
2. Press A8 to cancel.
4After setting the temperature, the heater automatically selects
the required power depending on the temperature dierence;
less than 2°C dierence is half power, more than 2°C dierence
is full power.
4The product switches o when the room temperature is higher
than the set temperature.
4The product switches on when the room temperature falls 2ºC
below the set temperature.
Setting the weekly program
4Setting the weekly program is only possible by remote control.
1. Press the weekly program button Ao to enter into weekly
program setting.
2. Press the day button Ap to set the starting day.
3. Press the Edit button Ad to select a program.
4. Press the timer on button Af to set the starting time (only in
hours).
5. Press timer o button As to set the stopping time (only in
hours).
4The stopping time cannot be earlier than the starting time.
6. Press Ai to set the temperature.
7. Press Au to conrm the setting.
4There are up to 6 programs available each day of the week.
8. Repeat step 2 to 7 to set another program.
9. Press Ao to activate the weekly program.
4The product switches to standby when the program has the
same starting and stopping time.
4The weekly program is erased when Aq is switched o.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis HTBA20WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis HTBA20WT in the language / languages: All languages as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info