812852
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
3. Add cold or warm tap water to Ar via the hole.
4. Do not exceed the MAX indicator Aw.
5. Close Ae.
6. Place Ar into A6.
The product is delivered with a partially charged
battery. For optimal battery life, fully charge the
battery before rst use.
Using the product
4Test the water resistancy of the oor.
4This product is intended to clean dust and liquids
o waterproof hard oors such as. PVC, linoleum,
tiles and waxed parquet.
4This product is not intended to clean water-
sensitive oors such as untreated cork oors.
4Make sure the clean water reservoir Ar is lled
with water and the dirty water reservoir Ai is
installed in the product.
4Clean the oor from the inside out to avoid
leaving footprints on the freshly wiped oor.
4To avoid damaging the oor with a wet roller
brush A9, place the product into the charging
base Af when the product is not in use.
1. Clean the oor with a vacuum cleaner to remove
dust or loose particles.
2. Take the product out of Af.
3. Press the on/o button A2 to switch on the
product.
The roller brush A9 starts to rotate.
4. Press the water spray button A3.
5. Move the product back and forth until A9 is
fully wet.
6. Clean the oor by moving the product back
and forth at the same speed as using a vacuum
cleaner.
7. Press A2 to switch o the product.
8. Place the product on Af.
9. Press the self-cleaning button Ao.
A9 starts to rotate.
4The self-cleaning function removes the dirty
water from A9.
10. Empty and clean Ai. See ‘Emptying and
cleaning the dirty water reservoir.
11. Clean A9. See ‘Cleaning the roller brush.
Keep cells and batteries clean and dry.
Only use the provided charger and charging
base.
The product is delivered with a partially charged
battery. For optimal battery life, fully charge the
battery before rst use.
Secondary cells and batteries need to be charged
before use. Always use the correct charger and
refer to the manufacturer’s instructions or
equipment manual for proper charging
instructions.
Do not leave a battery on prolonged charge
when not in use.
After extended periods of storage, it may be
necessary to charge and discharge rechargeable
cells or batteries several times to obtain
maximum performance.
Do not unplug the product by pulling on the
cable. Always grasp the plug and pull.
Installing the product
4Make sure the product is placed on a at and
stable surface.
1. Push the handle tube A4 into the body A6.
When the parts are successfully assembled, you
hear a click.
2. Place the product on the charging base Af.
3. Plug the power adapter As into a power outlet.
4. Plug the other end of As into the charging port
Ad.
4Charge the battery for at least 3.5 hours when
you use it for the rst time.
5. The battery indicator LED Ap lights up.
6. Remove As from the power outlet after
charging.
7. Leave the product on Af.
Battery indicator LEDs (image B)
4The lowest battery indicator LED Ap starts
ashing if the battery is empty.
Removing and lling the clean water
reservoir (image C)
1. Hold the handle A1 with one hand, and pull the
water reservoir handle Aq with the other hand
to remove the clean water reservoir Ar.
2. Pull out the water inlet plug Ae and rotate Ae
to one side.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis HHEM300WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis HHEM300WT in the language / languages: All languages as an attachment in your email.

The manual is 4.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info