6
• Do not locate the product immediately below a power outlet.
• This product may only be serviced by a qualied technician for maintenance
to reduce the risk of electric shock.
• Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
• Do not use the product in rooms where ammable liquids or gases are used
or stored.
• Do not use any charger other than that specifcally provided for use with the
equipment.
• Do not leave a battery on prolonged charge when not in use.
Charging the product
1. Place the product on a stable and at surface.
2. Make sure the control wheel A
4
is rotated to OFF.
3. Insert the power cable A
7
into the power supply port A
6
.
4. Insert A
7
into a power outlet.
4
The charging indicator LEDs A
3
indicate the charging progress of the
battery.
4
When the battery is fully charged, all the charging indicator LEDs A
3
switch
o.
5. Unplug A
7
from the power outlet when the battery is fully charged.
-
Do not leave a battery on prolonged charge when not in use.
Controlling the product
4
The product can run with the power cable connected to a power outlet.
4
When the battery is charged, the product can run without power cable.
4
The battery operation time depends on various external factors, like the
selected fan speed or ambient temperatures.
1. Place the product on a stable and at surface.
2. Rotate A
4
to the desired fan speed to switch on the product.
3. Rotate A
4
to OFF to switch o the product.
Adjusting the product
To aim the fan in the right direction follow the next steps:
1. Loosen the side knobs A
2
.
2. Tilt the fan grill A
1
to the desired angle.
3. Tighten A
2
.