727330
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
Specications
Product Smoke alarm
Article number DTCTSL50WT
Dimensions (l x w x h) 45 x 45 x 42 mm
Noise level >85 dB ≤ 3 m
Battery type CR123A 3 V (Included)
Battery life Up to 10 years
Sensor life Up to 10 years
Current ≤7 µA (standby)
Weight 50 g
Operating
temperature
0 - 50 °C
Humidity 10 % - 95 %
c
Kurzanleitung
Rauchmelder DTCTSL50WT
Für weitere Informationen
beachten Sie die erweiterte
Anleitung online:
ned.is/dtctsl50wt
Bestimmungsgemäße Verwendung
Dieses Produkt ist nur zur Raucherkennung gedacht.
Anderweitige Verwendung oder Veränderungen
am Produkt stellen eine unsachgemäße Nutzung
dar und können Risiken für schwere Unfälle zur
Folge haben. Dieses Produkt ist nur zur Verwendung
innerhalb von Gebäuden gedacht. Dieses Produkt ist
nicht für den gewerblichen Einsatz gedacht.
Das Produkt darf nicht in feuchten Räumen oder
in der Nähe von Türen, Fenstern, Ventilatoren oder
Heizungen gedacht.
Jegliche Modikation des Produkts kann Folgen
für die Sicherheit, Garantie und ordnungsgemäße
Funktionalität haben.
Hauptbestandteile (Abbildung A)
Rauchmelder
Anzeige-LED
Test / Still“ Taste
Magnet
Montagehalterung
Schraube (3 x 25 mm)
Stecker (6 x 28 mm)
Vorbereitung (Abbildung B - D)
Installieren Sie das Produkt an der Wand oder Decke.
Das Produkt muss installiert werden:
in jedem Zimmer,
auf jedem Stockwerk,
im Flur,
im Treppenhaus,
in Lagerräumen,
an Orten mit elektrischer Ausstattung.
-
Installieren Sie das Produkt nicht in der Spitze
einer Dachschräge, da sich dort rauchfreie Luft
ansammeln kann.
Installieren Sie das Produkt an der Decke mit
mindestens 1 m Abstand vom höchsten Punkt
der Decke.
Installieren Sie das Produkt mit mindestens
61 cm Abstand von der Ecke der Wand.
Installieren Sie das Produkt mit mindestens
50 cm Abstand von uoreszierender
Beleuchtung.
Installation des Produkts (Abbildung E)
1. Drehen Sie A
5
gegen den Uhrzeigersinn, um es
von A
1
zu entfernen.
2. Entfernen Sie A
4
von A
1
, um das Produkt
einzuschalten.
3. Platzieren Sie A
5
an der gewünschten Position.
4. Verwenden Sie A
5
, um die Bohrlöcher mit
einem Stift zu markieren.
5. Bohren Sie zwei Löcher mit Ø 6mm
Durchmesser.
6. Setzen Sie die Dübel ein.
7. Befestigen Sie die Montagehalterung mit A
6
.
8. Drehen Sie A
1
im Uhrzeigersinn, um es an
A
5
zu befestigen.
Testen des Produkts
Das Produkt muss wöchentlich getestet werden, um
einen ordnungsgemäßen Betrieb sicherzustellen.
1. Drücken und halten Sie A
3
bis das Produkt
einen durchgehenden Signalton abgibt und
A
2
zu blinken beginnt.
2. Lassen Sie A
3
los. Der Signalton stoppt und
A
2
hört auf zu blinken.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis DTCTSL50WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis DTCTSL50WT in the language / languages: All languages as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nedis DTCTSL50WT

Nedis DTCTSL50WT User Manual - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info